USB/ Dual SD Player + Digital Mixer OPERATING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
MAIN FEATURES y Auto cue y Auto BPM y Pitch display y 100% Anti-shock y Real time cue y Built-in audio mixer y Fast Track Search y Music Master tempo y SD & SDHC cards available y Mp3 Track Listings, ID3 Tags y 1/75th second frame search y Jog Wheel Pitch Bend +/-100% y Big LCD Display with Backlight y Digital EQ, Mixing and Level Control y Folder Search, Multi-Cue Function y Cross fader start control for CD player y Headphone output with volume control y Selectable Single
CONTROLS AND FUNCTIONS TOP PANEL 1. SOURCE SELECT BUTTON – This button lets you toggle between USB Port and SD Card slots. This lets you choose which music source device will play on either side. The LEDs will verify which source is activated. Glowing green “A” LED signifies USB A port, green “A” LED is blinking signifies CARD A slot； Glowing red “B” LED signifies USB B port, red “B” LED is blinking signifies CARD B slot. The function can only be selected under pause mode. 2.
CONTROLS AND FUNCTIONS TOP PANEL 11. CHANNEL EQUALIZER – All of the channels include a two-band signal EQ. These controls are used to increase or decrease the LOW and HIGH of the output signal. (only available when MIXER OUTPUT is ON) ) HIGH frequency control This knob is used to adjust the high levels of a channel allowing for a maximum high gain of 10dB or maximum decrease of –26dB.
CONTROLS AND FUNCTIONS TOP PANEL 23. RELOOP BUTTON – If a SEAMLESS LOOP has been made, but the Player is not actively in SEAMLESS LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly reactivate the SEAMLESS LOOP mode. To exit loop, press the OUT BUTTON. LOOP and RELOOP will appear in the LCD DISPLAY when the RELOOP function is available. 24. MASTER VOLUME CONTROL – This knob is used to control the master output level.
CONTROLS AND FUNCTIONS 1 LCD DISPLAY 3 2 4 5 17 6 16 7 8 15 9 14 13 12 11 10 1. CUE INDICATOR – This indicator will glow when the device is in CUE mode and will flash every time a new CUE POINT is set. 2. FOLDER INDICATOR – Indicates the number of the currently playing folder. 3. TIME BAR INDICATOR – Shows either time remaining or elapsed depending on the setting of the SETUP MODE.
BASIC OPERATION SOURCE SELECT functions 1. MUSIC SOURCE DEVICE SELECT There is a SOURCE SELECT BUTTON to select the music source playback in each PLAYER by your desires. You have three different choices as below: (a) THE SAME CARD PLAYBACK To play the same card in both player 1 and player 2; insert the card into either SDA or SD B slot. Press the SOURCE SELECT and both SD A LEDs in the player panel are on when card is in SD A slot; either does when card is in SD B slot.
BASIC OPERATION FOLDER KNOB serves 2 functions depending on which mode you are working in: 1. The LCD will display the playing folder name whenever you press the FOLDER knob. 2. You can also search the folders in music source device by turning the FOLDER knob. The playing folder name will display in the LCD whenever you press the FOLDER knob. Turning the FOLDER knob you can search the folders in music source device. TRACK KNOB serves 2 functions depending on which mode you are working in: 1.
BASIC OPERATION FRAME SEARCH This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue or loop point. To use the scroll function you must first be in Pause Mode or Cue Mode. Once you are in Pause or Cue mode, turn the JOG WHEEL to scroll through the track. Turning the wheel in a clockwise direction will advance the frame search and turning the wheel in a counter-clockwise direction rewinds the frame search.
BASIC OPERATION SEAMLESS LOOP 1. CREATING AND PLAYING A SEAMLESS LOOP A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length of the current folder. You can create a seamless loop between two continuous points of a music source device as below: (1) Press PLAY/PAUSE BUTTON to activate playback mode. (2) Press the IN BUTTON.
BASIC OPERATION 4. EDITING A LOOP You can edit your seamless loop you obviously must first have created a seamless loop to edit. If you haven’t created a SEAMLESS LOOP, follow the instructions in step 1 to create a loop. There are three methods as below: (1) Edit a seamless loop’s ending point You can edit the end point of the loop to make your loop shorter or longer. Make sure the loop that you want to edit is not in reloop mode. Turn the JOG WHEEL in search mode to make the loop shorter/ longer.
BASIC OPERATION STORING A CUE POINT: Once you have set your CUE Point, you may store your cue point in one of the CUE BANK BUTTONS. Either a CUE POINT or a Loop can be stored into a CUE BANK BUTTONS. (1) Press the MEMORY BUTTON as right Figure. The Memory LED will glow indicating the store memory function has been activated. You may now press any one of the 4 CUE BANK BUTTONS to store your cue point into memory. After pressing one of the CUE BANK BUTTONS, the corresponding CUE BANK Button LED will flash.
BASIC OPERATION STUTTER EFFECT When a loop is playing you can press RELOOP button to restart the loop at once. You can also press this button when a track is not playing in loop. Every time the RELOOP button is pressed, it will restart the pre-programmed loop. The stutter effect adds extra creativity to your performance. TAP BPM AUTO BPM is the default mode when power on. You can switch Manual /Auto BPM by pressing the “TAP BPM” button. Notice: Switch Manual BPM on just need one touch the button.
SYSTEM SETTING SETUP MODE Press the SEARCH button for more than 2 seconds to enter system setting mode. At this time, LCD display “PRESET” and the SETUP LED will lit. Note: System setting will be closed automatically when more than 10 seconds no function. Turn the FOLDER knob to scroll through the different submenus, you can adjust the setting by stopping on the desired submenu and pushing the FOLDER knob.
SYSTEM SETTING Once enter the SETUP mode you can browse the items by turning FOLDER knob, and pressing FOLDER knob to on or off item selection, see more details of the different submenus and options as below: ) TIME MODE: You can select different time display by pressing the FOLDER knob to switch between elapsed and remaining. The default setting is REMAIN TIME ) PLAY MODE: This function allows you to choose single-track play or continuous track play (all tracks in order).
SPECIFICATION MODEL: MPSD-2, USB AND Dual SD Card MP3 Player + Digital Mixer (compatible with USB mass storage device 1.0/1.1/2.0) DIMENSIONS: 482 (W) x 132 (H) x 74.8 (D) mm POWER SOURCE: DC 6V, 2A WEIGHT: 2.5 kg GENERAL: Display Pitch control range Pitch accuracy LCD Within +/-4%, +/-8%, +/-16% +/-0.15 % AUDIO CHARACTERISTICS (LOAD: 100K (LINE),600ohm(BAL), 32ohm( PHONES). TEST SIGNAL: MP3, 128Kbps) ITEM OUTPUT LEVEL: (GAIN MAXIMUM, EQ FLAT) TYPICAL LINE: 2.1V +/-0.5dB BANCED OUT 2.1V +/-0.
SPECIFICATION MP3 FORMAT SD/USB Format MP3 Format File system Applicable file extensions Max. number of Folders Max. number of files MPEG 1 Layer 3 standard (ISO/IEC 11172-3), which provides for single channel (‘mono’) and two-channel (‘stereo’) coding at sampling rates of 32, 44.1 and 48kHz. MPEG 2 Layer 3 standard (ISO/IEC 13818-3), which provides for similar coding at sampling rates of 16, 22.05 and 24 kHz. MPEG 2.5 Layer 3 standard, which provides for similar coding at sampling rates of 8, 11.
NOTE 18
