Operation Manual

Safety Warnings:
All the safety and operating instructions should be read before the
appliance is operated.
To prevent fire or shock hazard, do not expose this appliance to rain
or moisture.
To reduce the risk of electric shock, do not remove the cover (or back).
There are no serviceable parts inside. Always refer servicing to qualified
service personnel.
Cautionary Notes:
Care must be taken not to damage the power supply cord housing,
which could expose line parts and cause electric shock. When removing
from wall outlet, be sure to remove by holding the plug and not by
pulling the cord.
In order to prevent electric shock; do not open the top cover. If a
problem occurs, contact your dealer.
Do not place metal objects or spill liquid inside the mixer. Electric shock
or malfunction may result.
Any use of the controls, or any adjustment, or the performance of
any procedure other than those specified herein may result in serious
damage to your health.
The unit should not be opened or repaired by anyone except properly
qualified service personnel.
Double insulated - when servicing, use only identical replacement parts .
Check List
• Check that the following parts are included in the package with the
main unit:
1) Turntable platter
2) Slip mat
3) Dust cover
4) 45-rpm adapter
5) Counterweight
6) Headshell
7) Operating instructions
8) Phono lead
2
Illustration and Main Features
1) 45-rpm Adapter
2) Slip Mat
3) Center Spindle
4) Strobe Dots
5) Power Switch/Strobe
6) Start/Stop Button
8) Target Light
9) Remote Start Socket: This jack can be connected with an external
switch to perform the Start/Stop operation.
10) Headshell
11) Speed Select Buttons
12) Quartz lock LED
13) Pitch Control Slider
14) Static Balanced Tonearm
15) Trim control
16) Arm Rest
17) Cueing Lever
18) Anti-skating Knob
19) Counterweight
20) Spare Cartridge Holder
21) Hinge For Dust Cover
22) Phono Sockets L+R
23) Phono Sockets Earth (GND)