Professional Power Amplifier CLIP CLIP SP200 SP Series Professional Power Amplifier Before attempting to connect, operate or adjust this product, please read these instructions completely. Rev: 2.
CLIP CLIP SP200 C ongratu lations on your choice of stereo power amplifiers — you have purcha sed one of the finest stereo am plifiers on th e market today. This unit was develop ed usin g the ex pertise of profe ssional sound engineers and w orking musicians . You will find that your ne w SP S eries has superior performance and g reater flexibilit y than any other amplif iers in its price range. Please read this m anual carefully to get th e most out of your new unit.
CAUT IO N An equilatera l triangle enclosing a lighteni ng flash/arro whead s ymbol is intended to alert the user to the presence of uninsulated "dange rou s voltage" wi thin the pro duct s enclosure which may be of suffic ient magnitude to cons titute a risk of electric shock. CAUTION: T O RED U CE THE RISK OF ELECTRIC S HOCK DO N OT RE MOV E COV ER (O R BAC K). NO U SER SE RVIC EABLE PARTS INS IDE .
3 5 CLIP 1 2 CLIP 6 SP200 6 4 FRONT PANEL 1. POWER SWITCH reduce the output level of the preceding component to avoid audible distortion. To turn the unit ON or OFF, press the Left or Right portion of this button. Before turning on the amplifier, check all connections and turn down the level controls. A momentary muting is normal when turning the amplifier on or off.
To ensure years of enjoyment from your SP Series , please read and understand this manual thoroughly before using the unit. INSPECTION RACK MOUNTING Your SP Series was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. (Note: SP Series is not responsible for shipping damage.
POWER SPECIFICATIONS STEREO INTO (4 Ω ) STEREO INTO (8Ω ) POWER SPECIFICATIONS INPUT SENSITIVITY INPUT IMPENDANCE FREQUENCY RESPONSE (at 10db below rated output power) DISTORTION (SMPTE-1M) S/N RATIO GENERAL SPECIFICATIONS SP200 SP400 100W 70W 200W 130W SP200 SP400 0.77V 10kΩ balanced 25Hz~25KHz +0/-1dB -3dB points:5Hz~50KHz <0.