User`s manual

ManualsBrandsCityCom ManualsMusical equipmentCCR 525S

Digital-Crypto Works-Satellite Receiver

User’s Manual

CryptoWorks CAS Embedded

Common Interface Digital Satellite Receiver

CCR 521S / CCR 525S

German

This marking shown on the product or its literature,

indicates that it should not be disposed with other

household wastes at the end of its working life.To

prevent possible harm to the environment or human

health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Hosehold users should contact either the retailer where they

purchased this product, or their local government office, for details of

where and how they can take this item for environmentally safe

recygling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract.This product should not be mixed

with othercommercial wastes for disposal.

Die Kennzeichnung auf dem Produkt bzw. auf der

dazugeh

rigen Literatur gibt an,dass es nach seiner

Lebensdauer nicht zusammen mit dem normalen

Haushaltsm

ll entsorgt werden darf. Entsorgen Sie

dieses Ger

t bitte getrennt von anderen Abf

llen,

um der Umwelt bzw. der menschlichen Gesundheit

nicht durch unkontrollierte M

llbeseitigung zu schaden

.Recyceln Sie das Ger

t, um die nachhaltige Wiederverwertung von

stofflichen Ressourcen zu f

rdern. Private Nutzer sollten den H

ndler,

bei dem das Produkt gekauft wurde, oder die zust

ndigen Beh

rden

kontaktieren, um in Erfahrung zu bringen,wie sie das Ger

t auf

umweltfreundliche Weise recyceln k

nnen. Gewerbliche Nutzer sollten

sich an Ihren Lieferanten wenden und die Bedingungen des

Verkaufsvertrags konsultieren. Dieses produkt darf nicht zusammen

mit anderem Gewerbem

ll entsorgt werden.

INSTRUCTION ABOUT ‘WEEE’ SYMBOL

English

I/B parenthesis to offer information for user.

Summary of content (16 pages)

PAGE 1
INSTRUCTION ABOUT ‘WEEE’ SYMBOL I/B parenthesis to offer information for user. English German This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
PAGE 2
Table of Contents Table of Contents 1. SAFETY PRECAUTIONS 2 2. GENERAL FEATURES 3 3. HOW TO CONNECT YOUR RECEIVER 4 4. HARDWARE DESCRIPTION 6 5. SYSTEM SET-UP 10 6. MENU OPERATION 12 7. UPGRADE BY SATELLITE 24 8. TROUBLE SHOOTING 26 9.
PAGE 3
1. SAFETY PRECAUTIONS This receiver has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully MAINS SUPPLY : 95�240V AC 50/60Hz LOCATION : Locate the receiver indoor. Locate receiver away from potential hazards such as houseplants, lighting, raining and direct sunlight. OVERLOADING : Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock.
PAGE 4
3. HOW TO CONNECT YOUR RECEIVER Please DO NOT plug in the main power supply cord until you have finished all the connections. 1) LOCATION OF THE RECEIVER Your receiver should be placed under proper ventilation. Don’ t put in completely enclosed cabinet that will restrict the flow of air, Resulting overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver.
PAGE 5
4. HARDWARE DESCRIPTION 4. A. FRONT PANEL 1) POWER : This key is used to turn the receiver on and off (stand by). 4. B. REAR PANEL 2) CH : These keys are used to change the channels. 1) LNB IN : This port is to connect the coaxial cable from LNB of your Dish. The IF input is provided through this port and the input frequency range is 950�2150MHz. Also the voltage switching 13V and 18V is passed through this port. 3) VOL : These keys are used to increase and decrease the volume level manually.
PAGE 6
4. C. REMOTE CONTROL UNIT 1) POWER : This is used to switch the receiver to ON/STANDBY mode. LAST 15) LAST : This key is used to return to the previous channel. 2) MUTE : This key is used to toggle between normal and muted audio. AUDIO 16) AUDIO : This key is used to select the soundtrack list for the current service 3) 0-9 NUMERIC KEYS : These keys are used to enter numeric values and to 0 ~ 9 and also used to select audio mode. select the channel directly by entering its number.
PAGE 7
5.SYSTEM SET-UP 5.A. Automatic channel search for a satellite You can automatically detect and save all TV and Radio channels of a satellite as follows : System Connection ■ Connect the receiver to all peripheral devices. 5. B. Manual channel search for a transponder You can automatically search and save all TV and Radio channels of a transponder as follows : Main Menu / Channel Search ■ Select Menu / Channel Search. ■ Select the satellite which you want to search.
PAGE 8
6. MENU OPERATION The main menu is classified into five sub menus which will carry out the various operation individually. 6.1 MAIN MENU After installing your dish system and receiver with appropriate connectors, plug in the AC main power and turn on the receiver. Press the MENU key of the RCU. You will see the“Main Menu”on the TV screen as follow. Please note that the“ Common Interface ”menu will be displayed for the CI Model.
PAGE 9
6.1.1.B. MANUAL CHANNEL SEARCH In normal mode, you can edit each channel separately. You can add to the selected channel into the favorite list. And you can also delete, lock/unlock or rename each channel. In block mode, you can edit multiple channels at a time. You can select multiple channels and add them to the favorite list. You can also delete, move or lock/unlock them at a time. To select block, move to a channel and press “ OK ” key and move to another channel and press “ OK ” key, so on.
PAGE 10
6.1.2.C. Delete channel – F3 key Select channel that you want to delete using the “ up / down ” keys and the “ page up/ down ” keys. When you want to delete multiple channels at a time, set channels as block by pressing “OK” key at each channel. You can also deselect each selected channel by pressing “OK” key again. After select channel or set block, press “F3” key to delete the selected channel(s). 6.1.2.D.
PAGE 11
On time Off time Additional Timer : Set the time when the receiver will be automatically turned on : Set the time when the receiver will be automatically turned off. : Set three event timer. 6.1.3.C. Additional Timer You can set three additional timer. Each timer have there own time, date and channel. Receiver lock Menu lock Maturity Rate Change PIN code Lock or unlock your receiver. When receiver is locked, the PIN code will be required whenever you turn on the receiver.
PAGE 12
This receiver is equipped with two PCMCIA slots. Select“Common Interface”menu in main menu, and the following screen will be displayed. When a common Interface CAM is inserted inside the PCMCIA slot, the receiver detects the type of the CAM automatically and display in the main menu. On choosing this menu, you will be able to access the different optionsavailable with the type of the CAM like Authorizations, prebooking, package details etc. 6.2.MAIN FUNCTIONS 6.2.1.
PAGE 13
When you press the “♬”key, you can alternatively select TV or radio channel guide. Press the“GUIDE”key again to view the one channel Guide. Press the“menu”key or“exit”key to return to previous menu. 6.2.5. Subtitle When the current channel that you are watching includes the subtitle, you can popup the subtitle window by pressing “TEXT” key. When you press “TEXT” key, the menu for selecting the language will be appeared. Please select the language of the subtitle that you want to watch. 6.2.4.
PAGE 14
7. UPGRADE BY SATELLITE Do not switch off the Receiver during the data download! You can upgrade your receiver up to date, when the new software is available. Select “Receiver upgrade” in the “Receiver Settings” Menu to enter Software download. 1. Select “Upgrade via satellite” item and the “ Scan default channel” window will appear as follows. 1.A. The default satellite and transponder will be automatically selected for download.
PAGE 15
8. TROUBLE SHOOTING 9. TECHNICAL SPECIFICATIONS Problem Solution About the Receiver Does not display LED on the - Connect the power cord to the power outlet front panel or the receiver has no power. properly. No pictures on the screen - Check if the receiver is in standby mode. - Check if the video output port is firmly connected to the Tv. - Check if you have selected the correct channel or video output on your TV. No sound - Connect the audio cords properly. - Check the volume level of the TV.
PAGE 16
5. Audio Decoder System Decoding Audio Mode Sampling Frequency : MPEG-1 ISO/IEC 11172-3 Layer I & II : Mono, Dual, Stereo, Joint Stero : 32, 44.1, 48 KHz 6. Audio/Video Output TV SCART VCR SCART RCA Jack S/PDIF S-Video : CVBS, RGB, Audio L/R : CVBS, Audio L/R : CVBS, Audio L/R : Digital Audio : S-VHS 7. RF Modulator Modulator Output Video Type UHF Output Level Output Connector Ant.