User`s manual

MENU OPERATION 17
MENU OPERATION16
6.1.2.C. Delete channel – F3 key
Select channel that you want to delete using the “ up / down ” keys and the “ page up/ down ” keys.
When you want to delete multiple channels at a time, set channels as block by pressing “OK” key at
each channel. You can also deselect each selected channel by pressing “OK” key again. After select
channel or set block, press “F3” key to delete the selected channel(s).
6.1.2.D. Lock/Unlock channel – F4 key
Select channel that you want to lock or unlock using the “ up / down ” keys and the “ page up / down ”
keys. When you want to lock or unlock multiple channels at a time, set channels as block by pressing
“OK” key at the each channel. You can also deselect each selected channel by pressing “OK” key
again. After select channel or set block, press “F4” key to lock or unlock the selected channel(s).
6.1.2.E. Move channel – F2 key in block mode.
You can change the position of channels in the channel list by selecting them as a block and move
them. Select channel(s) you want to move using the “ up / down ” keys and the “ page up / down ”
keys and press “OK” key. After set block, press “F2” to enter block move mode. You can move
selected block of channels by using “ up / down ”, “ left / right ” or “ page up / down ” keys in the
channel list. After move to the new position, press “OK” key to locate those channels at this position.
6.1.3 . Receiver Settings
You can change the various settings of your receiver in this menu.
6.1.3.A.System Settings
This menu helps you to Set up video output mode,
Ianguage, time, screen type and parameters related
with RF modulator.
Select System Settingsmenu in the “Receiver
Setting”Menu, and the following screen will be displayed.
: Select video output mode - CVBS or RGB
: Select or change RF channel number when your receiver is
connectedto TV by RF connector. The factory preset value is
channel 38.
: In the above case, you can choose PAL B/G mode or PAL I mode or
PAL D/K mode.
: You can choose either 4:3 or 16:9 according to the TV type.
: You can select the transparency of the menu.
: Adjust the clock.
: You can select the menu language.
: You can select the audio language.
: You can set how long the information box will be displayed.
TV Select
RF Channel
RF Mode
Screen Type
Menu Transparency
Time Adjustment
Menu Language
Audio Language
Information Timeout
Press the menukey or exitkey to return to previous menu.
6.1.3.B. Time Settings
You can change the time of your receiver and also
switch on/off the timer function in this menu.
Select “Time Settings” item in the “ Receiver Settings”
menu and the following screen will be displayed.
: Select the time mode of your receiver. In Auto mode, your receiver will
use the information from the satellite as timereference. In manual
mode, you can set the time of your receiver manually.
: Set the time offset from the UTC (GMT).
Useful in auto mode only.
: Set the current time manually. Useful in manual mode only.
: Enable or disable the Summer Time. Most European countries use the
Summer Time.
Useful in auto mode only.
Time Mode
Time Adjustment
Current time
Summer Time