User`s manual
MENU OPERATION 19
MENU OPERATION18
6.1.3.D.Parental Controls
This function prevents children or unauthorized
persons from watching programs.
Also you can change PIN(Personal Identification
Number) code.
Select Parental Controlmenu in theReceiver
Settingsmenu, and the following screen will be
displayed.
You can set three additional timer.
Each timer have there own time, date and channel.
Lock or unlock your receiver. When receiver is locked, the PIN code will
be required whenever you turn on the receiver.
Lock or unlock the menu of your receiver. When menu is locked, the PIN
code will be required whenever you enter the menu items.
Set the level of maturity rate that the receiver will show the channels
without asking PIN code.
You can change your PIN code from the previous one in this menu. If
you forget the PIN code, you have to contact the distributor to find out it.
The factory default is “0000”.
Receiver lock
Menu lock
Maturity Rate
Change PIN code
: Set the time when the receiver will be automatically turned on
: Set the time when the receiver will be automatically turned off.
: Set three event timer.
On time
Off time
Additional Timer
: Number of timer.
: Enable or disable the timer.
: Set the time when the receiver will be automatically turned on.
: Set the time when the receiver will be automatically turned off.
: Set the timer period. (Daily / Weekly / One Time)
: Set the day (Period : Weekly) or date(Period : One Time).
: Set the service type to TV or Radio.
: Set the channel number of service.
Timer No.
Enable
On time
Off time
Period
Date
Service
Channel
6.1.3.E. RECEIVER UPGRADE
You can upgrade the software of this receiver through serial port when the new software is
released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful information and new software for the receiver.
6.1.3.F. FACTORY DEFAULT
This is to restore the factory set values in case the user has encountered some problems
after changing any new values of channel data and others which may be in error.
Select Factory Defaultmenu in the “Receiver Settingsmenu and press OKkey.
If you want to continue, select Yescell.
The receiver will be reset to settings automatically.
Please note that the Factory Defaultprocedure may take a few minutes.
6.1.3.C. Additional Timer