Installation Guide

3
Operating frequency 125KHz & 13,56MHz.
Reading technologies
Electromarine EM4200, MIFARE® CSN 4 byte, MIFARE® CSN 7 byte, MIFARE®
Classic, MIFARE® Plus and MIFARE® DESFire EV1. Also supports other ISO
14443 A/B* compatible cards.
*Not all ISO14443 B cards have been implemented in the reader, please contact
Civintec Global for more details on current status.
Mobile ID
ISO18092NFC, BLE (Bluetooth low energy)
Barcode/QR scanner
Area image 640 x 480 pixels, Filed of View 68°(H) x 51(V)
Decode range: 20mm-150mm(QR 20MIL)
Roll/Pitch/Yaw: 360°, ±55°, ±55°
Multiple formats supported (1D & 2D Codes): QR Code, Micro QR code,
PDF417, Code 128, Code 39 and most mainstream 1D and 2D barcodes.
Secure Access Module
(SAM):
MIFARE SAM AV2, external SIM card connection slot.
Communication protocols Wiegand, RS485 (OSDP 1, OSDP 2, including Secure channel), BLE.
Reading output format 24-1024 (excluding parity bits)
Keypad output format Wiegand 4bit, Wiegand 8bit (Dorado), Wiegand 26bit, OSDP ASCII format.
Keypad
12 digit keypad in 4 rows of 3 keys in each row with congurable
backlight in blue color. Control features On/O󰀨/Auto indicators.
Light itensity can be adjusted.
Indicators LED, Green, Red and Yellow (Bi-color). Backlight in blue color. Buzzer.
Power supply 9 – 30VDC
Input/Output
4 input for LED and buzzer and 2 congurable General Purpose Input/Output
(GPI/O). The GPI/O’s are push/pull type which provides 5VDC as output
when “high” on each respective GPI/O connection pin..
Tamper alarm
Built-in mechanical tamperswitch which allows for
indication both break o󰀨 protection and opening of the reader.
Operating temperature
RFID reader: -40° ~ +70°C (With thermostat controlled embedded heater)
When installing readers in environments with extreme heat
(above + 50°C) it is recommended to utilize the climate protection
SC9901-V which provides additional shading to the reader.
QR code module: -20°~ +55°C
Heater Thermostat controlled embedded heater.
Operating humidity 0 – 95% RHNC (Relative Humidity No Condensation)
Ingress Protection
Classication
IP65 require together with werther protection cover SC9901-T or SC9901-V.
Housing dimension L=143mm, H=80mm, W=91mm
Conguration Methods Conguration card, Congcard software or factory congured readers.
Compliances FCC, CE
Cidron Combi (VG3 QR) Reader
- Technical specications