Instruction Manual

True Wireless
Earbuds
Instruction Manual
ITEM 53858-DI
Experience a world without wires with these stylish True
Wireless Earbuds. Enjoy balance sound, dynamic range
and noise isolation while listen to music or talking on
the phone. The battery charging case will charge the
earbuds on the go up to 3 full charges. The convenient
LED digital readout will let you know when the battery
charging case is running low so you can recharge it and
never run out of juice.
PACKAGE CONTENTS
• TWS Earbuds
• Charging Case
• Type C Charging Cable
CHARGING YOUR TWS EARBUDS & CHARGING CASE
1. Please connect the Type C charging cable to the back
of the charging case (with the earbuds inside the
case) and then to a 5V USB power source and charge
for approx. 2 hours.
2. As the Charging Case is charging you are also charging
the TWS earbuds inside the case.
3. To recharge the TWS earbud just place them in the
charging case. The red LED lights on the TWS earbuds
will remain on when charging. Once the earbuds are
fully charged the LED will turn OFF.
PAIRING THE TWS EARBUDS TO EACH OTHER
1. Remove both TWS earbuds from the Charging Case and
wait 5 seconds and they will pair automictically to each
other.
2. Note that initially both LED lights on both earbuds will
flash green and red and then after 5 seconds the Right
earbud will stop flashing and only the Left will continue
to flash. This means they are paired to each other. Once
this is done you can now pair the earbuds to your phone.
3. Once the TWS earbuds have been connected, when
using them again they will automatically connect to
each other.
PAIRING TWS EARBUDS TO YOUR PHONE (BLUETOOTH)
1. Turn ON your Bluetooth in your Phone settings.
2. Search for Pairing name CJ Tech TWS Earbuds in your
phone and connect. Once your phone says connect you
are done.
3. Once connected you can now listen to music or have a
phone conversion hands-free and totally wire free!
CONTROLLING MUSIC & ANSWERING PHONE CALLES
You can control the songs/music you are listen to from
the TWS earbuds!
• Previous/Next Song: Press Left key twice to play the
previous music. Press Right key twice to play the next
music.
You can control your phone call also directly from the
earbuds!
• Answer/Hang Up: press the left/right earbud button
once to answer the phone , and then press the button
again to hang up.
• Reject a Call: Hold the left/right earbud button 2
seconds to reject call.
• Game Mode: Press the left/right earphone button 3
times to enter or exit game mode.
• Turn on Siri or Android Voice Assistant: Hold the
left/right earbud button for 2-3 seconds, then release
the button, start the voice control. Press the earbud
button once to turn off the Siri and android voice
Assistant.
AUTO SHUTDOWN AND MANUAL SHUTDOWN
• Auto Shutdown: Put the earbuds into the charging case
and they will automatically turn off.
• Manual shutdown: Hold the left/right earbud button for
4-5 seconds and you will hear a voice prompt “Power
OFF”. The red LED light will remain on for 1 second and
then the earbuds will turn OFF.
SWITCHING BETWEEN SINGLE AND DUAL EARBUD MODE
The factory default is for Dual Earbud mode. When in dual
earbud working mode (not connected to the mobile
phone), quickly press the left earbud button four times to
enter the single earbud mode. Both the red and green
lights on the earbuds will flash alternately. Now you are
able to use earbuds individually if you desire.
In the standby mode of the single earbud mode (not
connected to the mobile phone), press the left earbud button
four times to enter the dual earbud mode. The left earbud
LED light will flash alternately, and the right earbud LED light
will turn OFF. You are now back to dual earbud mode.
SPECIFICATION
• Charging Input: 5.0±0.25V/1A
• Bluetooth Version: 5.0
• Earbud Battery: 30mAh
• Earbud Charging Time: 60min
• Charging Case: 380mAh
• Charging Case Charge Time: 2hours
• Talk Time: Up to 4hours (full power)
• Music Play Time: Up to 4hours (full power)
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference, received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such
modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The Bluetooth
®
word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by CJ Global is under license. Other
trademarks and trade names are those of their respective owners.
FRONT
BACK
53858-DI 53860-DI TWS Earbuds with Charging Case
CLOSED: 7 cm x 10 cm / OPEN: 21 cm x 10 cm