Installation Instructions

Tripod Selfie Stick

M/N:53834-DI

FCC ID: 2AND8-BSRSM1

A. PAIRING

1. Long press the remote button to power on, LED indicator starts flashing, waiting for pairing.

2. Turn on bluetooth function and Search for "SelfieCom" on bluetooth list.

3. Pair with "SelfieCom". LED indicator will stop flashing after successfully connected.

B. CAPTURING

1. Go to camera app of your cellphone(iOS), Use the remote control to capture pictures, LED flash

once at a time.(for android system, see next step)

2. Go to camera setting, set the volume key function as capture to make sure the remote work

properly.

C. Remarks

1. The remote control will automatically shut down in 5 mins if not paired.

2. The remote control will automatically sleep in 10 mins without any operation. and auto shut

down after another 10 mins if not awaken.

3. Long press the remote button to power off, LED indicator flashes 3 times then shut down.

PAGE 1
Tripod Selfie Stick M/N:53834-DI FCC ID: 2AND8-BSRSM1 A. PAIRING 1. Long press the remote button to power on, LED indicator starts flashing, waiting for pairing. 2. Turn on bluetooth function and Search for "SelfieCom" on bluetooth list. 3. Pair with "SelfieCom". LED indicator will stop flashing after successfully connected. B. CAPTURING 1. Go to camera app of your cellphone(iOS), Use the remote control to capture pictures, LED flash once at a time.(for android system, see next step) 2.
PAGE 2
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.