User's Manual

Instructions of use
1. Diaper wetness
- 3 wetness levels – Wet, Damp and Moist.
- The sensitivity of different wetness levels may be configured.
- The buzzer may be turned on/off.
- Indications of status:
Status Indications
Sensor unclipped / wrongly
clipped
User indicator: Blinks; Buzzer: Beep-beep.
Sensor battery low
User indicator: Blinks; Low battery indicator: On; Buzzer:
Beeps continuously after clipping on the diapers.
Sensor clipped
User indicator: On.
Moist
Moist indicator: Blinks slowly.
Damp
Damp indicator: Blinks.
Wet
Wet indicator: Blinks quickly; Buzzer: Beeps continuously.
-
Status display and user
selection
Power
Mute
Communication LED
Network LED