4.1 Home Theater System with Bluetooth User’s Guide for Model ITBSW241 v2971-01 For the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.
Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Setup Features & Specifications - 5 Power - 5 Remote Battery - 5 Includes - 5 Orientation Rear View - 6 Front View - 6 Source Mode Indicator LED - 6 Speaker Controls - 6 Connecting the Satellite Speakers - 7 Connecting the Subwoofer - 7 Remote Functions & Controls - 8 Connecting Devices Initial Bluetooth Connection and Playing Audio - 9 Troubleshooting - 9 Aux In - 9 Learn Feature -10 Company Information Contact Information - 12 International Support - 12 Warranty - 12 4
Setup Features & Specifications Includes • Supports Bluetooth 5.0, range: 60 ft. • Remote control with CR2025 battery • 4.1 channel stereo sound • AC/DC power adapter • Digital volume control • 3.5mm to RCA cable • Full-function remote • Aux In (3.5mm audio input) Bluetooth QDID : 115952 Power Plug the power adapter for the soundbar into the DC Input on the back of the soundbar and a standard wall outlet. Remote Battery Requires 1 CR2025 battery (pre-installed).
Orientation Rear View Speaker Inputs: Audio Outputs (to speakers) | Sub Audio Output | DC Power Input Front View Function/Source Indicators: Power | Bluetooth | Aux In Source Mode Indicator LED STATUS INDICATOR LIGHT Power Off Red Light Bluetooth Standby/Pairing Quick Flashing Blue Light Bluetooth Connected Solid Blue Light Aux In Mode Green Light Speaker Controls Power/Source Press to power the unit ON. Press and hold to power the unit OFF.
Connecting the Satellite Speakers Connect each satellite speaker to the two satellite speaker inputs on the rear of the sound bar. Note: If there is no sound from satellite speakers, please make sure the sub and satellite speakers are correctly connected. Sound bar Satellite Speakers Connecting the Subwoofer Connect the subwoofer to the output labled "Sub Out" on the rear of the sound bar as seen below.
Remote Functions & Controls Power Press to turn the unit on or off. POWER MUTE SOURCE AUX Press to switch to Bluetooth Mode. Aux Press to switch to Aux In mode. MUSIC Play/Pause In Bluetooth Mode, press to play or pause audio tracks. Press and hold to pair to a Bluetooth device. 8 DIALOG Music Press to switch to the EQ optimized for music. Press and hold Music for 5 seconds to turn voice prompts ON/OFF. Movie Press to switch to the EQ optimized for movies.
Connecting Devices Initial Bluetooth Connection and Playing Audio 1. When first powered ON the unit defaults to Bluetooth mode. A voice will say, “Bluetooth,” and the LED indicator will quickly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ITBSW241 in the Bluetooth Settings Menu to pair. If need be, refer to the user’s manual for your specific device for more information. 3.
Learn Feature What Is the Learn Feature? The Learn feature captures remote commands from your television remote, and teaches your soundbar to operate when these commands are pressed. Power, volume and mute are a few examples of commands that the bar speaker can learn. Why Use the Learn Feature? Teaching the bar speaker remote commands will reduce the number of remotes needed, save time searching for remote codes, and improve the ease of operation.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
