5.
Safety Instructions & Warnings Important Safety Instructions = Rend those Instructions. + Keep haste Instructions. = Heed all Wakings. + Follow all retractions. * Do not use this epigrams near water. + Clean early with a dry cloth. * Do not block any ventilation openings. Install in ascendance ‘with the manufacturer's instructions. = Do not install near any heat sources such a3 mediators, host er ron, her para (cluing splice) the polarized or rounding. type ing.
Battery Warnings WARNING: Do not ingest battery, Chemical Burn Hazard. the rots control supplied with fis product contains a ‘contributor cell battery and the contribution cell battery is swallowed, it can cause vars internal burns in just 2 hours and can lead to death. * Org now and weed batteries away from children, If the ioe tin pet os bps ‘seek immediate medial striation. CAUTION; Agar of explosion if bakery i insomniac replaced. Replace only with the same or equivalent type.
Setup Features « Bluetooth Wireless range surround sound audit inputs + stereo audio inputs + Sub woofer (main unit) + 26" central speaker with 4 satellite speakers + Remote control: requires CR2025 battery (included) + RCA 10 3.5mm stereo audio cable + RCA to RCA audio cables Power Plug the AC/DC parer adapter into a standard wall outlet. Speakers Connect each speaker wire with the corresponding port on the rear of the sub woofer.
Orientation Sub woofer Rear View o o Sub woofer Bass Tube a NOTE: To reduce Saran Audio unwanted vibration, Inputs (1, R) ny placing the sub woofer on a solid or padded 5.1 Surround Sound surface, such as the Audio Inputs floor or carpet.
Sub woofer Front View Pre no—on ~ ‘With the unit powered ON a) Press and hold to manual Press and hold to power OFF, —eCD pale to 2 Bluetooth. paid Press to switch between 5.1 Nan) With the unit powered OFF, CH, Aux In, and Blusterous 568 press to begin using the modes. Team function. Skip LED Indicator Lights Press ta skip ahead or back an audio track (BLUETOOTH). Remote Signal Receiver Play / Pause [Volume . Press to play or pause audio (BLUETOOTH). Tum dal to adjust volume up or down.
Remote Functions Note: When using the remote, be sure to aim at the remote signal receiver lactated on the front of the suborder. Paar Press to power the system ON or place It in Standby Mode. Aux Press to switch to Aux In (REA) mode. SATE Press to switch 105.1 Surround Sound Mode. Press and hold for 5 seconds to tum vole prompts ON/OFF. Press to switch to Bluetooth Mode. Volume-/+ Press to adjust volume floral speakers. Remote Batteries Requires 1 CR2025 battery (per-installed).
Audio Inputs 2 Port Ste res RCA Inputs (Aux) I your TV, DVD, or other media player has a 3.5mm audio line output, use the top 2 audio inputs {Left/Right channel) on the rear of the sub woofer for stereo audio. While connected to the Aux Inputs, the unit will send audio signal to all of it's speakers to simulate a surround sound effect. Requires a 3.5mm stereo audio cable (included). 1.
Audio Inputs 6 Port 5.1 Surround Sound RCA Inputs (5.1 CH) To use the 5.1 Input on this system will require a source (TV, DVD, Blu-Ray, ar other media player} with 5.1 Surround Sound analog audio outputs. If your media source Is so equipped, use the lower 6 audio Inputs on the rear of the sub woofer. Requires 6x RCA audio cables (included). 1. Connect the RCA audio cables to the RCA Inputs on the sub woofer and the audio outputs on your TV, DVD player, etc.
Bluetooth Wireless Pairing to a Bluetooth Device and Pk ig Audio Tirelessly 1. When the system first powers ON i defaults to Bluetooth made and is ready to pair automatically. The pairing indicator will begin flashing blue. When pairing, remain within 3 feet of the unit. 2. Use the controls on your Bluetooth device to select MHTI142 In your Bluetooth settings. if your device requests password, enter the default password 0 00 0.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following wo conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Walking: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.