Instruction Manual

ManualsBrandsCla-Val ManualsEquipment100-01 Technical Manual

Specifications Model 100-01

Viton

Rubber Parts

suffix KB

Optional diaphragm, disc and o-ring fabri-

cated with Viton

synthetic rubber. Viton

well suited for use with mineral acids, salt

solutions, chlorinated hydrocarbons, and

petroleum oils; and is primarily used in high

temperature applications up to 250° F.

not use with epoxy coatings above

175° F.

Epoxy Coating - suffix KC

This option NSF 61 Listed and FDA

approved, fusion bonded epoxy coating is

for use with cast iron, ductile iron or steel

valves. This coating is resistant to various

water conditions, certain acids, chemicals,

solvents and alkalies.

Epoxy coatings are

applied in accordance with AWWA coating

specifications C116-03.

Do not use with temperatures above

175° F.

Dura-Kleen® Stem - suffix KD

This stem is designed for applications

where water supplies containing dissolved

minerals create deposits that build-up on a

standard stem and hamper valve opera-

tion. A patented, self-cleaning design on

the stem allows all valve sizes to operate

freely in the harshest conditions.

Delrin

Sleeved Stem

suffix KG

The Delrin

sleeved stem is designed for

applications where water supplies contain

dissolved minerals which can form

deposits that build up on the valve stem

and hamper valve operation. Scale build-

up will not adhere to the Delrin

sleeve

stem. Delrin

sleeved stems are not rec-

ommended for valves in continuous opera-

tion where differential pressures are in

excess of 80 psi (2" and larger Hytrol valves).

Heavy Spring

suffix KH

The heavy spring option is used in applica-

tions where there is low differential pres-

sure across the valve, and the additional

spring force is needed to help the valve

close. This option is best suited for valves

used in on-off (non-modulating) service.

Anti-Cavitation Trim

suffix KO

Anti-Cavitation Trim components consist of

a stainless steel radial slotted disc guide

and seat. This system is used when high

differentials are present across the valve.

Water Treatment Clearance

suffix KW

This additional clearance is beneficial in

applications where water treatment com-

pounds can interfere with the closing of the

valve. The smaller outside diameter disc

guide provides more clearance between

the disc guide and the valve seat. This

option is best suited for valves used in on-

off (non-modulating) service.

For assistance in selecting appropriate valve options or valves manufactured with special design requirements, please contact

our Regional Sales Office or Factory.

Available Sizes

Pattern Threaded Flanged Grooved End

Globe

⁄8" - 3" 1

⁄2" - 36" 1

⁄2"-2"- 2

⁄2"- 3"- 4"- 6"- 8"

Angle 1" - 3" 1

⁄2" - 16" & 24" 2" - 3" - 4"

COVER

PIPE PLUG

COVER BEARING

SPRING

STEM NUT

DIAPHRAGM WASHER

DISC RETAINER

BODY

SPACER WASHERS

DISC GUIDE

SEAT

PIPE PLUG

STEM

SEAT O-RING

STUD

8" and Larger

*DIAPHRAGM

*DISC

*Repair Parts

Seat Screw

8" and Larger

(Globe

Angle)

PIPE PLUG

HEX NUT

8" and Larger

Cover Bolt

6" and Smaller

DISC GUIDE

SEAT

KO Anti-Cavitation

Trim Option

Component Standard Material Combinations

Body & Cover Ductile Iron Cast Steel Bronze

Available Sizes 3/8" - 36" 1" - 16" 1" -16"

Disc Retainer &

Diaphragm Washer

Cast Iron Cast Steel Bronze

Trim: Disc Guide,

Seat & Cover Bearing

Bronze is Standard

Stainless Steel is optional

Disc Buna-N

Rubber

Diaphragm Nylon Reinforced Buna-N

Rubber

Stem, Nut & Spring Stainless Steel

For material options not listed, consult factory.

Cla-Val manufactures valves in more than 50 different alloys.

Materials

Valve Body & Cover

Pressure Class

Flanged Grooved Threaded

Grade Material

ANSI

Standards*

150

Class

300

Class

300

Class

End‡

Details

ASTM A536 Ductile Iron B16.42 250 400 400 400

ASTM A216-WCB Cast Steel B16.5 285 400 400 400

ASTM B62 Bronze B16.24 225 400 400 400

Note: * ANSI standards are for flange dimensions only.

Flanged valves are available faced but not drilled.

‡ End Details machined to ANSI B2.1 specifications.

Valves for higher pressure are available; consult factory for details

Pressure Ratings

(Recommended Maximum Pressure - psi)

Operating Temp. Range

Fluids

-40

to 180