Manual

ManualsBrandsCla-Val ManualsEquipment100-01KO

Cla-Val Control Valves with KO ANTI-CAVITATION Trim operate with maximum efficiency when mounted in horizontal piping with the main valve cover Up. We recommend isolation valves

be installed on inlet and outlet for maintenance. Adequate space above and around the valve for service personnel should be considered essential. A regular maintenance program should

be established based on the specific application data. However, we recommend a thorough inspection be done at least once a year. Consult factory for specific recommendations.

GGGG

DDDD

Inlet

AAAA

100-01KO

Grooved

(MAX)

Inlet

Outlet

(Diameter)

GGG

Inlet

DDD

100-01KO

Threaded &

Flanged

(MAX)

Inlet

Outlet

AAA

(Diameter)

Pressure Ratings

(Recommended Maximum Pressure - psi)

Model 100-01KO

GGG

Inlet

DDD

100-01KO

Threaded &

Flanged

(MAX)

Inlet

Outlet

AAA

(Diameter)

Specifications

Operating Temp. Range

Pattern Globe Angle Grooved End

Size 1-

⁄4" - 36" 1-

⁄4" - 16" & 24" 1-

⁄2" - 8"

APPROVED

(4" - 24")

Component Standard Material Combinations

Body & Cover Ductile Iron Cast Steel Bronze

Available Sizes 1-1/4" - 36" 3" - 16" 3" 16"

Disc Retainer &

Diaphragm Washer

Cast Iron Cast Steel Bronze

Trim: Disc Guide,

Seat & Cover Bearing

Stainless Steel is Standard

Disc Buna-N

Rubber

Diaphragm Nylon Reinforced Buna-N

Rubber

Stem, Nut & Spring Stainless Steel

For material options not listed consult factory.

Cla-Val manufactures valves in more than 50 different alloys.

Materials

Note:

Consult Factory

on 10",12", 16"

angle pattern

Valve Body & Cover

Pressure Class

Flanged Grooved Threaded

Grade Material

ANSI

Standards*

150

Class

300

Class

300

Class

End‡

Details

ASTM A536 Ductile Iron B16.42 250 400 400 400

ASTM A216-WCB Cast Steel B16.5 285 400 400 400

ASTM B62 Bronze B16.24 225 400 400 400

Note: * ANSI standards are for flange dimensions only.

Flanged valves are available faced but not drilled.

‡ End Details machined to ANSI B2.1 specifications.

Valves for higher pressure are available; consult factory for details

Valve Size (Inches) 1 1/4 1 1/2 22 1/2 3468101214161820243036

A Threaded

7.257.259.3811.0012.50————————————

AA 150 ANSI

— 8.50 9.38 11.00 12.00 15.00 20.00 25.38 29.75 34.00 39.00 41.38 46.00 52.00 61.50 63.00 76.00

AAA 300 ANSI

— 9.00 10.00 11.62 13.25 15.62 21.00 26.38 31.12 35.50 40.50 43.50 47.64 53.62 63.24 64.50 76.00

AAAA Grooved End

—8.509.0011.0012.5015.0020.0025.38—————————

B Dia.

5.62 5.62 6.62 8.00 9.12 11.50 15.75 20.00 23.62 28.00 32.75 35.50 41.50 45.00 53.16 56.00 66.00

C Max.

5.50 5.50 6.50 7.56 8.19 10.62 13.38 16.00 17.12 20.88 24.19 25.00 39.06 41.90 43.93 54.60 61.50

CC Max. Grooved End

—4.755.756.887.259.3112.1214.62—————————

D Threaded

3.253.254.755.506.25————————————

DD 150 ANSI

— 4.00 4.75 5.50 6.00 7.50 10.00 12.69 14.88 17.00 19.50 20.81 — — 30.75 — —

DDD 300 ANSI

— 4.25 5.00 5.88 6.38 7.88 10.50 13.25 15.56 17.75 20.25 21.62 — — 31.62 — —

DDDD Grooved End

——4.75—6.007.50———————————

1.12 1.12 1.50 1.69 2.06 3.19 4.31 5.31 9.25 10.75 12.62 15.50 12.95 15.00 17.75 21.31 24.56

EE Grooved End

—2.002.502.883.124.256.007.56—————————

F 150 ANSI

— 2.50 3.00 3.50 3.75 4.50 5.50 6.75 8.00 9.50 10.50 11.75 15.00 16.50 19.25 22.50 25.60

FF 300 ANSI

— 3.06 3.25 3.75 4.13 5.00 6.25 7.50 8.75 10.25 11.50 12.75 15.00 16.50 19.25 24.00 25.60

G Threaded

1.881.883.254.004.50————————————

GG 150 ANSI

— 4.00 3.25 4.00 4.00 5.00 6.00 8.00 8.62 13.75 14.88 15.69 — — 22.06 — —

GGG 300 ANSI

— 4.25 3.50 4.31 4.38 5.31 6.50 8.50 9.31 14.50 15.62 16.50 — — 31.62 — —

GGGG Grooved End

——3.25—4.255.00———————————

H NPT Body Tapping

.375.375.375.50.50.75.751111111122

J NPT Cover Center Plug

.25 .25 .50 .50 .50 .75 .75 1 1 1.25 1.5 2 1.5 1.5 1.5 2 2

K NPT Cover Tapping

.375.375.375.50.50.75.751111111122

Stem Travel

0.4

0.4 0.6 0.7 0.8 1.1 1.7 2.3 2.8 3.4 4.0 4.5 5.1 5.63 6.75 7.5 8.5

Approx. Ship Wt. Lbs.

15 15 35 50 70 140 285 500 780 1165 1600 2265 2982 3900 6200 7703 11720

Fluids

-40 to 180 F

Valve Size (mm) 32 40 50 65 80 100 150 200 250 300 350 400 450 500 600 750 900

A Threaded

184184238279318————————————

AA 150 ANSI

— 216 238 279 305 381 508 645 756 864 991 1051 1168 1321 1562 1600 1930

AAA 300 ANSI

— 229 254 295 337 397 533 670 790 902 1029 1105 1210 1362 1606 1638 1930

AAAA Grooved End

—216228279318381508645—————————

B Dia.

143 143 168 203 232 292 400 508 600 711 832 902 1054 1143 1350 1422 1676

C Max.

140 140 165 192 208 270 340 406 435 530 614 635 992 1064 1116 1387 1562

CC Max. Grooved End

120120146175184236308371—————————

D Threaded

8383121140159————————————

DD 150 ANSI

— 102 121 140 152 191 254 322 378 432 495 528 — — 781 — —

DDD 300 ANSI

— 108 127 149 162 200 267 337 395 451 514 549 — — 803 — —

DDDD Grooved End

——121—152191———————————

29 29 38 43 52 81 110 135 235 273 321 394 329 381 451 541 624

EE Grooved End

—52647379108152192—————————

F 150 ANSI

— 64 76 89 95 114 140 171 203 241 267 298 381 419 489 572 650

FF 300 ANSI

— 78 83 95 105 127 159 191 222 260 292 324 381 419 489 610 650

G Threaded

484883102114————————————

GG 150 ANSI

— 102* 83 102 102 127 152 203 219 349 378 399 — — 560 — —

GGG 300 ANSI

— 102* 89 110 111 135 165 216 236 368 397 419 — — 582 — —

GGGG Grooved End

——83—108127———————————

H NPT Body Tapping

.375.375.375.50.50.75.751111111122

J NPT Cover Center Plug

.25 .25 .50 .50 .50 .75 .75 1 1 1.25 1.5 2 1.5 1.5 1.5 2 2

K NPT Cover Tapping

.375.375.375.50.50.75.751111111122

Stem Travel

10 15 18 20 28 43 58 71 86 102 114 130 143 171 190 216

Approx. Ship Wt. Kgs.

7 7 16 23 32 64 129 227 354 528 726 1027 1353 1769 2812 3494 5316