00-04
MODEL 100-04 (Full Internal Port) Hy-Check Valve • • • • • Built-in Automatic Check Valve Drip Tight, Positive Seating Globe or Angle Pattern Service Without Removal From Line Every valve factory-tested The Cla-Val Model 100-04 Hy-Check Valve is a hydraulically operated diaphragm valve with a built-in check feature to prevent return flow. Available in globe or angle pattern, it consists of a body, cover and diaphragm assembly.
Specifications Model 100-04 PIPE PLUG (TYP) BOLT/HEX NUT (TYP) Operating Temp. Range Available Sizes Pattern Flanged Fluids Globe 2" - 16" -40° to 180° F Angle 3" - 16" COVER COVER BEARING SPRING Pressure Ratings UPPER DIAPHRAGM WASHER Pressure Class Valve Body & Cover Grade UPPER STEM NUT (Recommended Maximum Pressure - psi) Flanged Material ANSI Standards* Threaded 150 Class 300 Class End‡ Details ASTM A536 Ductile Iron B16.42 250 400 400 ASTM A216-WCB Cast Steel B16.
Functional Data Inches Valve Size CV Factor Equivalent Length of Pipe Model 100-04 mm. Globe Gal./Min. (gpm.) Pattern Litres/Sec. (l/s.) Angle Gal./Min. (gpm.) Pattern Litres/Sec. (l/s.) 2 3 4 6 8 10 12 14 16 50 80 100 150 200 250 300 350 400 54 115 200 440 770 1245 1725 2300 2940 13 27.6 48 105.6 184.8 299 414 552 706 61 139 240 541 990 1575 2500* 3060* 4200* 14.6 33.4 58 130 238 378 600 734.4 1008 Globe Feet (ft.) Pattern Meters (m.
B (Diameter) Dimensions 100-04 Flanged Model 100-04 J K H C (MAX) Inlet Outlet E G GG D DD Inlet A AA Valve Size (Inches) A 150 ANSI AA 300 ANSI B Dia. C Max. D 150 ANSI DD 300 ANSI E F 150 ANSI FF 300 ANSI G 150 ANSI GG 300 ANSI H NPT Body Tapping J NPT Cover Center Plug K NPT Cover Tapping Valve Stem Internal Thread UNF Stem Travel Approx. Ship Wt. Lbs. Valve Size (mm) A 150 ANSI AA 300 ANSI B Dia. C Max.
Cla-Val Product Identification How to Order Proper Identification For ordering repair kits, replacement parts, or for inquiries concerning valve operation, it is important to properly identify Cla-Val products already in service by including all nameplate data with your inquiry. Pertinent product data includes valve function, size, material, pressure rating, end details, type of pilot controls used and control adjustment ranges. INLET EINTRITT ENTREE ENTRADA SIZE & CAT NO. STOCK NO. CODE MFD.
SPECIFY WHEN ORDERING HOW TO ORDER • Model Number • Globe or Angle Pattern • Adjustment Range (As Applicable) Because of the vast number of possible configurations and combinations available, many valves and controls are not shown in published product and price lists.
INSTALLATION / OPERATION / MAINTENANCE MODEL REPAIR KITS Complete Replacement Diaphragm Assemblies for 100-01 and 100-20 Hytrol Main Valves For: Hytrol Main Valves with Ductile Iron, Bronze Trim Materials—125/150 Pressure Class Only. FACTORY ASSEMBLED Includes: Stem, Disc Guide, Disc, Disc Retainer, Spacer Washers, Diaphragm, Diaphragm Washer and Stem Nut.
Repair Kits for 100-02/100-21 Powertrol and 100-03/100-22 Powercheck Main Valves For: Powertrol and Powercheck Main Valves—125/150 Pressure Class Only Includes: Diaphragm, Disc (or Disc Assembly) and O-rings and full set of spare Spacer Washers.
