Instruction Manual

N-100-46 (R-3/2011)
Model 100-46
CLA-VAL
Copyright Cla-Val 2011 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: [phone] • Fax: [phone] • E-mail: [e-mail] • Website cla-val.com
©
Specifications
Size (In) 1
1
⁄2 346
(mm) 40 80 100 150
A 150 ANSI 7.87 12.01 15.00 20.00
AA 300 ANSI 7.87 12.01 15.00 20.00
B 5.70 9.25 11.61 15.75
C .89 .93 .93 1.02
CC 300 ANSI .88 1.00 1.00 1.10
D 5.90 8.20 10.12 13.32
E 2.56 3.74 4.53 5.61
EE 300 ANSI 3.05 4.13 5.02 6.30
F .63 .71 .71 .91
FF 300 ANSI .87 .87 .87 .87
G 3.88 6.00 7.50 9.50
GG 300 ANSI 4.50 6.62 7.88 10.62
Flange Bolts (150 Class) 4488
Flange Bolts (300 Class) 4 8 8 12
Approx. Ship Wt. Lbs. 25 75 160 290
Approx. Ship Wt. Kgs. 11.4 35 73 132
Dimensions
Sizes
Globe (inch):
1
1
⁄2", 3", 4", 6"
End Detail
Slip-on Two Piece Flange
Dimensions Per ANSI B16.5
Pressure Rating
ANSI Class 150:
Maximum 285 psi
ANSI Class 300:
Maximum 400 psi
Higher Pressure Available
Please Contact Factory
Operating Temperature
Fluids Compatible with Valve
Materials
-40º to 180º F (-40º to 82º C)
Materials
Body, Cover, Trim,
Diaphragm Assembly,
Flanges, and Fasteners
316 Series
Stainless Steel
Electropolished
Disc:
Buna-N
®
Rubber*
Diaphragm:
Nylon Fabric Reinforced
Synthetic Buna-N
®
Rubber*
*Contact Factory for Other
Disc or Diaphragm Materials
Reduced Port Functional Data
When Ordering Please
Specify:
1. Catalog No. 100-46
2. Valve Size
3. Fluid Being Handled
4. Fluid Temperature
5. Inlet Pressure Range
6. Outlet Pressure Range
7. Maximum and Minimum
Differential Pressure
8. Flow Rate Range
F, FF
D
G, GG
EE
E
Inlet Outlet
Two Piece
FLANGE
(QTY 2)
NAMEPLATE
A
C, CC
AA
B
Size (Inches) Cv (gpm)* Cv (l/s)**
1
1
⁄2 32 7.7
3 67 16
4 138 33
6 242 58
*Cv = gpm flow at 1 psi drop
**Cv = l/s flow at 1 bar drop