TUBES VALVES AMPLIFIER Thanks for choosing Clan amplifier CLAN born in 2010, from the collaboration between Claudio Nessi and Andrea Ugonati. by the experience of electronics engineer Claudio, graduate when the tube technology was widespread, and by the experience of expert craftsman Andrea, who focused his jobs on the furnishings, born this second model VINTAGE 35 HEAD 2C-S-D, completed with the correspondent cabinet.
USER MANUAL CONTENTS - Technical Specifications Pag. 3 - Components Pag. 4 - Use Mode Pag. 5 - Features Pag. 6 - Amplifier cleaning Product disposal Pag. 8 - Safety Instructions Pag. 9 - EMC / EMI and conformity certificate Pag. 10 - Certificate of originality Pag. 11 TECHNICAL SPECIFICATIONS MODEL Vintage 35 Head 2C-S-D POWER OUTPUT 35W CHANNELS 2 (1 clean, 1 dirty) POWER SUPPLY* 110V - 220V C.A.
COMPONENTS The apparatus was assembled with the most advanced technologies. The components were selected from a product range, in respect to the RoHS directive.
USE MODE Connect the speaker jack (pag.7 n°6-7-8) making att ention to connect it with the right impedante output (look the speaker output). Connect the power jack (pag.7 n°1) and the instrument jack (pag.6 n°1). Ensure the amplifier is turned off before connecting the supply cable. When powering up your amplifier, first switch to the ‘Standby’ (pag.6 n°16) and leave for two minutes before switching to the power (pag.
FEATURES - Front Panel: 1. Signal input 13. Lighting Indicator Socket for the instrument. LED indicator; Amplifier switched on. 2. Headphones Output 14. Master Volume Connection socket for the headphones Main output volume control. 3. Channel 1 Indicator 15. Switch LED indicator; Channel 1 switched on. Switch for the power on and the power off. 4. Volume Channel 1 16. Standby Channel 1 volume control. It work as Gain and Volume. Standby switch. 5. Tone Channel 2 Channel 1 Tone control. 6.
- Rear Panel: 1. Power input line 6. Speaker output 4 ohm Connection power input. Connection for speaker with 4 ohm impedance. 2. Line fuse 7. Speaker output 8 ohm In case of replacement follow the instructions label. Connection for speaker with 8 ohm impedance. 3. Channel Footswitch socket 8. Speaker output 16 ohm It let the connection to the footswitch Connection for speaker with 16 ohm impedance. 4. Send; to the external effects. Output socket for possible external effects. 5.
AMPLIFIER CLEANING: Do not clean the apparatus with chemical products which can damage the product materials. We suggest you to use neutral and suitable products, for example a dry and soft cloth is the right choose as often as not. The periodic bias calibration is not necessary, because the electronic circuit is projected with autobias configuration. When you see the tubes life is end or there are malfunction of tubes, they must be changed at the discretion of the musician or of the assistance center.
WARNING! – Safety Instructions - Never use the amplifier in damp or wet conditions. No objects filled with liquids should be placed on the apparatus. - Refer all servicing to qualified service personnel including replacement of fuses and valves.
EMC / EMI AND CONFORMITY CERTIFICATE EMC/EMI This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment can’t generate radio frequency energy during his working.
CERTIFICATE OF ORIGINALITY Every CLAN product offers the possibility to customize the design, so we certificate the following features: MODEL EXTERNAL COVERING(1): VINTAGE 35 HEAD 2C-S-D MATERIAL: __________________ COLOR:______________________ SERIAL NUMBER FRONTAL COVERING(2): MATERIAL: __________________ COLOR:______________________ MANUFACTURING DATE DISPLAY(3): MATERIAL: __________________ COLOR:______________________ KNOBS(4): PURCHASER NAME AND ADDRESS MATERIAL: __________________ COLOR:___
Cl a n Clan Via Canaletta Superiore, 21 35048 Stanghella (PD) ITALIA tel/fax.
