User manual

7
- Rear Panel:
1. Power input line
Connection power input.
2. Line fuse
In case of replacement follow the
instructions label.
3. Channel Footswitch socket
It let the connection to the footswitch
4. Send; to the external effects.
Output socket for possible external effects.
5. Return; from the external effects.
Input socket from possible external
effects.
6. Speaker output 4 ohm
Connection for speaker with 4 ohm
impedance.
7. Speaker output 8 ohm
Connection for speaker with 8 ohm
impedance.
8. Speaker output 16 ohm
Connection for speaker with 16 ohm
impedance.
- Footswitch
The header is equipped with the own footswitch, in case of replacement follow the schematic below.
1. Channel 1-2 switch
It let change between Channel 1 and
Channel 2.