Manualshelf

User's Manual

ManualsBrandsClarIDy Solutions ManualsElectronicsUHF Single-lane Security Gate
12345678910
IDSmart UHF Security Gate User Manual
© Copyright 2014 ClarIDy Solutions, Inc. All rights reserved. 10/40
1.4.1. Raising the Panels
Unpack the main and secondary panel. The main panel can be identified by either looking
at the cable or the counter of the panel. The main panel should have 4 short RF cables, 2
Ethernet connector socket, a signal cable and a power cable coming out from the mounting
plate. Whereas, the secondary panel has 4 longer RF cables and a signal cable. The main
panel (item #1 in the following diagram) and the secondary panel (item #2) should be 780mm
apart standing with their mounting plate opening (#3) facing each other.