User's Manual

IDSmart UHF Security Gate User Manual

1.4.6 Preparation for Testing the Equipment

A notebook or computer with Ethernet adapter is required in order to setup the equipment

for testing. The default IP address of the equipment is set to 192.168.10.210 with subnet mask

of 255.255.255.0. Users are advised to set their notebook or computer Ethernet adapter to the

same network (i.e. 192.168.10.x). Then, plug one end of the Ethernet cable to the LAN

communication port of the equipment and the other end to the Ethernet adapter of the computer

or notebook. Follow instructions on section "1.5. Installation of the UHF Security Gate Tools" to

install the software tools to the notebook or computer.

1.5. Installation of the UHF Security Gate Tools

The release media include installation package for UHF Security Gate Tools. These tools

are useful in verifying the security gate peripheral functionalities. To install the package, run

"setup.exe". Dependency packages such as .NET Framework and Visual C++ Runtime are

installed first following by the setup welcome screen. Proceed as instructed.