User's Manual

IDSmart UHF Security Gate User Manual

The connection can only be made if the computer that has the remote access software

installed can reach the equipment.

 Ping the equipment from the computer to ensure that network connectivity is OK. If it is

a direct connection, check cable if the equipment has no response.

 Allow bi-directional access of port 22 as the equipment SSH protocol is configured to

listen and communicate through port 22. If it is a direct connection, check if there is any

antivirus or firewall security software that blocks this port when connection fails.

Consult the network administrator for further advice and information on the local area

network configuration. If the equipment and the computer is located on two different networks,

the gateway configuration of the equipment must be changed.

5.1. Connecting to the Equipment

Start the SSH remote access tool. "Putty" is used as the SSH remote access tool

throughout this user manual, users are free to choose different tool. Type the IP address of the

equipment in the "Host Name (or IP address)" textbox and click "Open" button.