User's Manual

IDSmart UHF Security Gate User Manual
© Copyright 2014 ClarIDy Solutions, Inc. All rights reserved. 25/40
$>blink-red-led 5
[Demo] Blink red led :: "5" seconds
$>
From left to right: Both LED lights are off, blue LED lights on, red LED lights on.
5.5. Buzzer and Alarm Triggering
Users can control the number of second that a buzzer beeps. By combining the buzzer
beeping and red LED light bar blinking, alarm effect can be created. The example causes the
buzzer to beep for 7 seconds and then sound the alarm for 3 seconds (red lights and buzzer will
be activated for 3 seconds).
[Demo] Start Demo Program.
$>
$>beep 7
[Demo] Beep in "7" seconds
$>trigger-alarm 3
[Demo] Trigger alarm in "3" seconds
$>
5.6. Counter
Users may increase the counting or reset the counting of the counter. The following
example increases the counter five times and then reset it. The counter current count can be
checked by looking at the lower part of the main panel. The reset counter is per request special
feature which might not available for most model.
[Demo] Start Demo Program.
$>
$>add-counter
[Demo] Plus 1 in the Counter
$>add-counter
[Demo] Plus 1 in the Counter
$>add-counter
[Demo] Plus 1 in the Counter
$>add-counter
[Demo] Plus 1 in the Counter
$>add-counter
[Demo] Plus 1 in the Counter
$>
$>reset-counter
[Demo] Reset the Counter
$>