User's Manual

IDSmart UHF Security Gate User Manual

After connected to the reader. Users may choose the intended operation using the "Menu"

located at the lower left corner.

6.3. Configuring the UHF RFID Reader and Antenna Settings

To configure the UHF RFID reader, select "Setup" from the "Menu". The setup dialog pops

up showing various parameters that can be refined. To start configuring the UHF RFID reader,

select the IP address of the UHF RFID reader by clicking the combo box located at the lower

left corner of the dialog.

After choosing the designated UHF RFID reader. The configuration tabs and options are

enabled with additional FixedQ and Carrier Wave tabs available for access.