User's Manual

IDSmart UHF Security Gate User Manual
© Copyright 2014 ClarIDy Solutions, Inc. All rights reserved. 6/40
1. Overview
The purpose of this user manual is to facilitate users in deploying the IDSmart™ UHF
Security Gate (hereafter referred to as "the equipment"). The manual describes the software
included in the equipment and how they could be used to verify the functionality of the
equipment.
The main peripheral of the equipment includes a UHF RFID Reader with antennas that
supports EPC C1G2 UHF RFID protocols, an embedded board, a retro-reflective type
photoelectric sensors (IR Sensor), a Passive Infrared Sensor (PIR Sensor), a pair of two-color
LED light bar, a counter and a piezo electric buzzer.
1.1. Specification
The specification of the equipment is as follows.
General Specification
Dimension 760mm (D) x 120mm (W) x 1700mm (H)
Material White acrylics with extruded aluminum
Color White (Standard Corporate Identity)
Weight 76.5Kg (Single Lane)
Power AC100~240V, 0.8A, 50/60HZ
Operating Temperature 0°C~55°C
Storage Temperature -20°C~85°C
Humidity 0%~95% non-condensing
Hardware Specification
Embedded Board ARM Cortex A8@1Ghz 1GB RAM
Storage 2GB SD Card (1GB available for user)
Operating System Embedded Linux
Communication Interface Ethernet, TCP/IP x1 for LAN
Ethernet, TCP/IP x1 for UHF Reader Setup/Tuning
UHF RFID Reader Ethernet Interface (Connected internally to embedded
board)
16 Port, EPC UHF Class 1 Gen 2
IR Sensor Retro-Reflective Type 2M
PIR Motion Sensor Max 5M (w/o top LED lampshade). Approx. 1.5-2M (with
top LED lampshade)
LED Light Strip 12V, two color (blue and red) LED
Buzzer Oscillation frequency 2.5 ±0.5 KHz
Counter Built-in battery powered 7-segment LCD with 8 digits