User's Manual

IDSmart UHF Security Gate User Manual

1.4. Quick Start

There are four different parts in the delivery package, which is, (a) the main panel of the

gate, (b) the secondary panel of the gate, (c) the slot fitting that connects the mounting plate of

the gate panels, (d) the cover of the slot fitting.

The standard product does not come with mounting plate or base plate. The enclosed

mounting plates and slot fitting are designed to facilitate the testing of the equipment. In actual

deployment, the equipment is mounted to the floor and cabling is done through a wiring conduit

or duct (See section 7. Appendix - Security Gate Mounting).

Upon unpacking the equipment, users should assemble the security gate in accordance to

the steps described in this section. The equipment must be assembled on a flat and level floor.

Failure of doing so will cause unexpected behavior and result. For best result, allow a 2 meter

clearance space for the equipment, as illustrated below.