User guide

F-10
4.
Your notebook is now configured for Direct Cable Connection. Do not
click Close. Rather, MINIMIZE the dialog unless you wish to terminate the
connection.
Connecting to and Disconnecting from the Network
The ClarinetIR software allows you a simple point and click solution to get
connected with DCC. If this software is not available then the following
instructions can help you achieve the same goal:
To connect the notebook to the network using Direct Cable Connection:
1.
Face your notebook infrared port directly toward any EthIR Beam
connected to the EthIR Switch.
2.
Establish a remote connection by running DCC from the Start menu or
desktop shortcut. A window pops up to display the status of the
connection.
3.
With your configured settings in place a dialog appears asking you to
Connect as Guest on COM4. Click Connect.
4.
Another window will ask for the host computer name. Choose Cancel.