Owner's Manual
WOOFER FEATURES
• UV protected Injection-
molded polypropylene cone
bodies with santoprene
rubber surrounds, specifically
formulated for marine
duty
• Marine-grade, synthetic spider
• Meets salt-fog and UV exposure
standards (ASTM B117/D4329)
BUILT-IN RGB LIGHTING
• Multi-color LEDs,
embedded
and concealed from direct sight,
produce
lively
accent
lighting
Included Components and Parts:
• One Marine Subwoofer
• One 0.250-inch Female Crimpable Connector
• One 0.187-inch Female Crimpable Connector
•
Six
M5
x
35
mm
Stainless-Steel Mounting Screws
• One Waterproof RGB LED Wire Harness
• Mounting Template
• Owner's Manual
RGB LED Illumination:
LED functionality requires separate wiring
at
each
speaker location. Choose from seven fixed LED colors
or
connect
an RGB lighting controller (sold separately)
for adjustable control.
BEFORE YOU BEGIN INSTALLING
•
Check
with your local waterway authority
for
any regulations regarding
the
use
of
accent/speaker lighting on your vessel.
• Turn
off
the
audio system. It is also
advisable
to
disconnect
your
battery system
whenever performing installation work.
• Before cutting, drilling
or
inserting any screw,
check
clearances
on
both sides
of
the
planned
mounting surface.
Also
check
for any potential
obstacles,
such
as wiring harnesses, fuel
lines, hydraulic lines, etc.
Check
both sides
of
the
vessel before cutting any holes.
• If you are running cables through bulkheads,
drill holes for
the
cable and use a urethane
or
plastic
grommet
to
protect
the
wire from
chafing in
the
hole. Make sure
that
the
cables will clear any mechanical devices in
the
boat
and secure them with wire ties.
• Wear protective eyewear
at
all times and a
dust
mask
and gloves
when
drilling
or
cutting.
mcAUTION
I
When installing speakers in
your
vessel, it is
extremely important
to
secure
them
firmly. This
applies not only
to
the speakers themselves,
but
also any structure they are mounted to. If
not
firmly
attached,
the
speakers can
become
dangerous
projectiles in a collision. Please review
the
mounting information carefully and use
the
supplied
marine-grade hardware to mount this product.
mwARNING
I
While
these
speakers
are
designed to be water and
spray
resistant,
they
are
not designed to be submerged or to
withstand high-pressure water
spray.
Do
not install
on
submersibles,
personal
watercraft or
any
other
vessel
likely
to be under water at any time.
Please
exercise
care
when
washing your boat to avoid damaging your
speaker.
Avoid
contact with
harsh
chemicals
or
cleaning agents to prevent
damage to the
speaker's
fi
n
is
h that will not be
covered
under
warranty.
Wash
with mild
soap
and
rinse
with freshwater
only.
mcAUTION
I
Prolonged exposure
to
sound pressure levels in
excess
of
100dB
can cause permanent hearing
loss. This high-performance speaker
can
exceed
this
level. Please exercise restraint in its operation
in
order
to preserve your ability
to
enjoy its fidelity.
mwARN
I
NG
I
It is absolutely vital that your coaxial speaker
system is connected
as
shown in this manual.
Failure to
connect
the
system
as
shown will
result in damage to your speakers which
is NOT covered under warranty. Do
not
substitute different crossover networks.