OWNER'S MANUAL CMM-20 Marine Source Unit with LCD Display clariol1 MARINE AUDIO
FCC COMPLIANCE STATEMENT SAFETY CONSIDERATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must not accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
+ x1 x1 x1 x1 + x1 D #8 x 1 in (25 mm) (x4) 3.68W in x 3.09H in (94W mm x 79H mm) GENERAL MOUNTING ✓ ~ '1'\ #8 x 1 in (25 mm) 3
GENERAL CONNECTIONS -•••--+-•••--- AUX -•••--•II■ ➔ [[ l] AMP . - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0 --- CMR-10 CMR-20 -E315A .. . (10 · 14.4V DC) : •• 4 -ff, I' .
GENERAL CONTROL FUNCTIONS clarion OBluetooth CMM-20 0 SOURCE Control Function I 0 Volume/ Select • Rotate to adjust volume • Rotate/press for navigation and making selections C) Source/ Power • Short press to turn ON; Long press to turn OFF • Short press to advance through available sources Settings • Short press to access audio settings (Bassffreble/Balance/Fader/EQ) • Long press to access system settings (Z2-Sub/Beep/Area/Diagnostic) SOURCE 0 SETTINGS .
SYSTEM MENU SETTINGS 0 • Long press to access settings SETTINGS 0 Setting • Rotate to navigate • Press to make selections Function I Configures preamp outputs: Z2 (rear) or Subwoofer Z2/ SUB BEEP Audible button press confirmation: On or Off AREA Configures tuner region : USA, Europe, Australia or Other DIAG Displays software version for diagnostics AUDIO MENU SETTINGS 0 • Short press to access settings SETTINGS 0 Setting • Rotate to navigate • Press to make selections I I Function Bas
BLUETOOTH MENU SETTINGS • Short press to access settings BACK/MENU 0 Setting • Rotate to navigate • Press to make selections Function I PAIR NEW DEVICE Initiates Pairing Mode (current connected devices will be disconnected) CONNECT PAIRED DEVICE Display all paired devices for connection SET PRIMARY DEVICE Assign priority to a paired device for automatic connection DELETE PAIRED DEVICE Select from paired devices for removal DELETE ALL DEVICES Removes all paired devices from memory USB MENU SE
SPECIFICATIONS Electrical Operating Voltage Operating Temp Range Current Draw / Fuse Value Remote Turn-On Output Display 14.4V DC (10V -16V) -22 F to +167 F (-30 C to +75 C) 15 A (max) / 33 mA (standby) / 15 A 500mA 2.37 in. TFT LCD backlit Tuner FM Tuner USA: 87.9 MHz to 107.9 MHz (0.2 MHz step) EUR: 87.50 MHz to 108.00 MHz (0.05 MHz step) AUS: 87.50 MHz to 108.00 MHz (0.10 MHz step) OTHER: 87.50 MHz to 108.00 MHz (0.
OPTIONAL REMOTE CONTROLLERS Add control capabilities from auxiliary locations with optional wired remotes (sold separately). Connect up to three controllers to a single source unit, at up to 75 ft (23m) away (cumulative cable length). Each wired remote connects directly using controller cables and 2-way splitters (sold separately). Refer to the supplied Owner's Manual for specific user and installation instructions.
clarion MARINE AUDIO ©2021 Clarion Marine Audio Printed in China
USA Li mit ed Warranty FOR MARINE AND POWERSPORTS AUDIO SOLD AT RETAIL: Clarion Marine warrants this product to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty is not transferable and applies only to the original retail purchaser from an authorized Clarion Marine dealer in the USA.
Clarion Marine Customer Service: 1-954-443-1101 9:00 AM - 5:00 PM (Eastern Time Zone) Clarion Marine Technical Support: www.clarionmarine.com/support Original Equipment Warranty For Clarion Marine products installed as original equipment by a boat or vehicle manufacturer, warranty coverage is provided within the boat or vehicle manufacturer's warranty program. Please contact your boat dealer or manufacturer.
