Owner’s manual Mode d’emploi Manual de instrucciones HIGH-FIDELITY AM/FM CD PLAYER • LECTEUR AM/FM CD HAUTE FIDELITE • REPRODUCTOR DE CD CON AM/FM DE ALTA FIDELIDAD Clarion Co., Ltd. All Rights Reserved. Copyright © 2004: Clarion Co., Ltd. Printed in Japan / Imprimé au Japon / Impreso en Japón 2004/5 (Abe.
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable.
Display Items Handling Compact Discs : Speaker indication : Disc indication : Scan indication : Repeat indication : Random indication : Mute indication : Manual indication : Stereo indication : Enter indication Operation status indication Titles, frequency, clock, etc. are displayed. : Cursor indication : Range adjustment indication 1.
. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Français Español Names of the Buttons and their Functions [ROTARY] [CD SLOT] [Q] [A M] [ROTARY] knob [BAND] button • Adjust the volume by turning the knob clockwise or counterclockwise. • Mute the sound. When the knob is pressed and held for 1 second or longer, the volume is changed from 1db steps to 0.5db steps.
4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Français Español Names of the Buttons and their Functions [ROTARY] [CD SLOT] [Q] [A M] [ROTARY] knob [BAND] button • Adjust the volume by turning the knob clockwise or counterclockwise. • Mute the sound. When the knob is pressed and held for 1 second or longer, the volume is changed from 1db steps to 0.5db steps.
Display Items Handling Compact Discs : Speaker indication : Disc indication : Scan indication : Repeat indication : Random indication : Mute indication : Manual indication : Stereo indication : Enter indication Operation status indication Titles, frequency, clock, etc. are displayed. : Cursor indication : Range adjustment indication 1.
English 5. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [SCN] [RPT] [FNC] [RDM] [DISC] [ ],[ ] [DISP] [BND] [ ],[ ] [ ] [ADJ] [ ],[ ] [A-M] [MUTE] [PS/AS] [ ], [ ] Inserting the Batteries 1. Turn the remote control over, and remove the rear cover with a sharp-pointed object while pressing in the direction of the arrow. 2. Insert batteries (CR2025) making sure that they face the directions shown in the figure. 3.
Mode Button Radio CD CD changer DVD changer [FNC] Switches among radio, CD, CD changer, DVD changer, TV and AUX. [BND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. 6. OPERATIONS TV Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Tunes in the desired station. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward. Tunes in the desired TV station. No function.
Radio Operations Basic Operations Adjusting the bass/treble FM reception You can turn the display ON/OFF by holding the [A-M] button down for at least one second. You can also turn the display ON by pressing the [DISP] button while the display is OFF. This function is used to set the tone in more detail for listening. • The tone can be adjusted when the Equalizer mode is set to "BASS/TREB".
CD Operations Insert a CD into the center of the CD SLOT with the labeled side facing up. “LOADING” appears in the display, the CD enters into the slot, and the play starts. For CD (12 cm) For single CD (8 cm) CD SLOT Notes: • Never insert foreign objects into the CD SLOT. • If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. • Discs not bearing the or mark and CD-ROMs cannot be played by this unit.
Operations Common to Each Mode This unit displays the time when the car engine is running (ACC ON). The clock is displayed in 12-hour format. • When a navigation system is connected, the clock cannot be adjusted as clock data is sent from the navigation system. 1. Press the [ADJ] button. The previously adjusted item "CLOCK", for example, is displayed on the title display, and the mode changes to the Adjust mode. 2. Press the [ ] or [ ] button to select "CLOCK". 3. Press the [s] button.
Operations Common to Each Mode These two modes can be used to make the following various sound adjustments for playing back music sources: • Setting of the filter (high-pass filter and low-pass filter) frequency for each speaker • Tone adjustment by P.EQ (parametric equalizer) or BASS/TREB (bass/treble) • Position setting by TIME ALIGN (time alignment) • Sub-woofer "ST" (stereo), "MONO" (monaural) and "OFF" Select the Standard mode or the Multi mode according to your speaker configuration.
Operations Common to Each Mode This function allows you to adjust how much the output level is to be lowered. ●Characteristics during gain adjustment LOW MID HIGH FRONT FRONT In the Multi mode: HIGH HIGH 0dB -24dB About phase (PHASE) The factory default setting is "NOR" (forward phase). Try switching between "NOR" (forward phase) and "REV" (reverse phase) and select the setting that sounds most natural to you.
Operations Common to Each Mode • Selection of channel (LEFT/RIGHT) Select the channel (left or right) to be adjusted. • Selection of band (BAND) Select the frequency band (1 to 5) to be adjusted. • Selection of center frequency (fo) Select the frequency to be taken as the center frequency in frequency correction.
Operations Common to Each Mode Setting the anti-theft indicator (BLINK LED) This unit is provided with two AUX input lines. The input level for third-party portable audio connected to each of these lines can be set. * The factory default setting is "MID". This function makes the indicator of Pch6 blink (red) when ACC is OFF to create a visual antitheft effect. * The factory default setting is "OFF". 1. Press the [ADJ] button. 2. Press the [ ] or [ ] button to select "AUX SENS". 3. Press the [s] button.
TV Operations CD Changer Operations Repeat play TV tuner functions Manual tuning ●Track-up 1. Press the [D] button to move ahead to the beginning of the next track. 2. Each time you press the [D] button, the track advances ahead to the beginning of the next track. ●Track-down 1. Press the [A] button to move back to the beginning of the current track. 2. Press the [A] button twice to move to the beginning of the previous track. Repeat play continuously plays the current track.
TV Operations 8. IN CASE OF DIFFICULTY Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1. Press the [BAND] button and select the desired TV band (TV1 or TV2). 2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism. Consult your store of purchase. Usable Discs: Compact disc Frequency Response (±1 dB): 5 Hz to 20 kHz Signal to Noise Ratio (1 kHz): 112 dB Dynamic Range (1 kHz): 100 dB Harmonic Distortion: 0.003% (20Hz to 20kHz) ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. Audio ERROR 2 A CD inside the CD changer is not loaded.
The list below shows values obtained by calculating the 1STEP delay with 1STEP distance set to 0.715625cm and rounding the resulting figures to the nearest whole number. 1STEP delay : 0.020833333[msec] T=20°C v =343.5[m/s] STEP Distance Time [cm] [msec] 0 0.0 0.00 1 0.7 0.02 2 1.4 0.04 3 2.1 0.06 4 2.9 0.08 5 3.6 0.10 6 4.3 0.13 7 5.0 0.15 8 5.7 0.17 9 6.4 0.19 10 7.2 0.21 11 7.9 0.23 12 8.6 0.25 13 9.3 0.27 14 10.0 0.29 15 10.7 0.31 16 11.5 0.33 17 12.2 0.35 18 12.9 0.38 19 13.6 0.40 20 14.3 0.42 21 15.
Multi Mode MEMORY1 Standard Mode HPF HIGH MEMORY1 LPF FILTER FRONT-LOW REAR HPF LPF SUB-W HPF FRONT-HIGH TIME Alignment FRONT-LOW REAR SUB-W Hz dB/oct dB NOR/REV BAND2 P.
