Operating Instructions and Installation Instructions

ORANGE
(CAM1)
BLACK
(CAM3)
GREEN
(CAM2)
BLACK
GROUND
RED
ACCESSORY(ACC)
DC12V/24V
CAM3CAM2CAM1 CAM4
*１
*１
*１
*１
*２
*２
*２
*２
Camera connecting cable
*１ Use Clarion Cameras only.
* ２ A camera connecting cable, sold separately,
is required for connecting the camera.
MONITOR CABLE
* Make sure that the connector cable with
the correct pin con guration is used.
19
CONNECTIONS
9.
■ Please ensure that the correct trigger wires are connected to the corresponding cameras.
ORANGE (CAM1, priority)
GREEN, BLACK (CAM2, CAM3)
Standby + (for rear-view)
* Connect this cable to the + side of the Reverse gear globe.
Standby + (for side-view)
* Connect Green cable to the + side of the Left turn signal globe
- Connect Black cable to the + side of the Right turn signal globe.