<'ii~';1 yt .' . · d .
CLARION PRODUCT REGISTR~TIONINFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
Contents Thank you for purchasing this Clarion product. • Please fully read this owner's manual before operating this equipment. • Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES ....................................................................................•..•...............................•2 2. PRECAUTIONS 3 Front Panel I Generalities 4 Remove the DCP 5 Re-attach the DCP 5 3.
1. FEATURES • MP3IWMA compatible with ID3-TAG display • Detachable Front Panel with 3.5mm Auxiliary Input • 4ch/2V RCA Output with Subwoofer Control and BEAT-EQ with 3 Band Parametric Equalizer [Q]m~~~ DIGITAL AUDIO IMP3/WMAI Expanding Systems Expanding audio features 4 Channel Amplifier Note: The items listed outside of the frames are the commercial products generally sold.
For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth.
Front Panel/Generalities For a longer seNice life, be sure to read the following cautions. • Do not allow any liquids on the set from drinks, umbrellas, etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage. • Do not let cigarettes burn the display. Doing so may damage or deform the body. • If a problem should occur, have the set inspected at your store of purchase.
Remove the DCP The control panel can be detached to prevent theft. When detaching the control panel, keep it in the safety place and prevent scratches. We recommend taking the DCP with you when leaving the car. 1. Press the [ <.!) ] button (2 sec.) to tu rn off the power. 2. Deeply push in [OPEN] button to unlock the DCP. 3. Hold the side popped out, take off the DCP. Re-attach the DCP 1. Hold the DCP and ensure that the panel faces towards you. Set the right side of the DCP into the DCP bracket. 2.
Operational Panel [BAND] [ .... ,-] [PS/AS] [OPEN] [MENU] Disc Slot [SOUND] [POWER/SRC] [ISR] [1-6] [VOLUME] AUX Jack [ADJ] Names of Buttons [ I SRC] Key • Power / Toggle the audio source [BAND] Key • Select tuner band [MENU] Key • System menu [VOLUME] Key • Adjust volume level/Confirm [ISR] Key • Recall ISR station stored in memory and store current station in ISR memory (long press) [1-6] Key [~] Key • Eject the disc in the unit. [~.
Remote Control [SRC] Key • Toggle the audio source / Power on / Power off (long press) [1+1I , ~] Key • Preset station up/down / Previous/ next track / Search(long press) SRC [POWERI--SRC] BND 0 ~-+-+- ~OWER .t. [SCN/PS/AS] Key • Scan play / Auto memory store / MP3 search - [BNDITOP] Key • Select tuner band / Top play (long press) ----f--f-- [ISR] [MUTE] [ ...
Handling Discs Handling Storage • • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
Basic Operations Note: Volume adjustment • Be sure to read this chapter referring to the chapter "3. CONTROLS" Turn the volume knob on the front panel or press the [ .. , .... ] key on the remote control. The adjustable range of volume is 0 to 40. A CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Power on / off Notes: • Start the engine before using this unit.
Radio Operations Select tuner as playing source Manual store Press [SRC] button once or more to enter radio mode. When one expected radio station has been detected, press and hold number key 1-6 to store it in the memory. Select one radio band Press the [BAND] key on the panel or [BND] key on the remote control to select one radio band among FM1, FM2, FM3, AM. Manual tuning During manual tuning, the frequency will be changed in steps.
CDIMP3IWMA Operations This unit can play back MP3IWMA files Notes: • If you playa file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output (The WMA indicator blinks). To disable DRM (Digital Rights Management) When using Windows Media Player 9/10111, click on TOOL OPTIONS COPY MUSIC tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility.
CDIMP3IWMA Operations • Discs not bearing the ~Q'[~ or r~ mark and CD-ROMs cannot be played by this unit. • Some CDs recorded in CD-R/CD-RW mode may not be usable. Pausing play 1. Press the [ 4 I HI] button to pause play. "PAUSE" appears in the display. 2. To resume CD play, press the [ 4 I HI ] button again. Displaying CD titles This unit can display title data for MP3/WMA disc. When SCROLL is OFF, each time you press the [BAND] button to change the title display.
CDIMP3IWMA Operations 2. Press [RPT] button repeatedly until "RPT OFF" appears on the LCD to cancel repeat playback. MP3IWMA: 1. Press the [RPT] button once or more until "TRACK RPT" appears on the display to perform repeat play, and "RPT" segment lights on. 2. For MP3/WMA files, press [RPT] button repeatedly until "FOLDER RPT" appears on the display for folder repeat play. 3. Press [RPT] button repeatedly until "RPT OFF" appears on the display to cancel repeat playback, and "RPT" segment goes off.
Audio Setup Press the [SOUND] key to enter sound effect setting mode. First Press shows current EO. Rotate the volume knob to changes BEAT EO in this order: OFF -> B-BOOST -> IMPACT -> EXCITE -> CUSTOM Press the [SOUND] key, then press [~ , ~] to select USER preset including: BALANCE -> FADER -> M-B EX -> LPF(low pass filter) -> SUBW VOL, rotate the volume knob to select a value. System Setup At radio mode, press and hold [ADJ] button to enter system MENU.
GENERAL Problem Unit can not power on Unit can not power on Nothing happens when buttons are pressed. Cause Unit fuse blown. Install new fuse with correct rating. Car battery fuse blown. Install new fuse with correct rating. Turn off the power and open the operation panel. Pres the reset button with a thin rod. Illegal operation. Display is not accurate. Remote control does not work Measure Note: When the Reset button is pressed, turn off the ACC power.
DISC Player Problem Disc cannot be loaded. Sound skips or is noisy. Cause Measure Another disc is already loaded. Eject the disc before loading the new one. There is a foreign matter already in place. Eject the foreign matter forcibly. Compact disc is dirty. Clean the compact disc with a soft cloth. Compact disc is heavily scratched Replace with a compact disc with no or warped. scratches.
FM Tuner Frequency range: 87.9-107.9MHz Usable sensitivity: 8dB~ Frequency response: 30Hz-15kHz Stereo separation: 30dB(1 kHz) Signal/noise ratio: >55dB AM Tuner Dimensions of the Main Unit: 188mm Width x 58mm Height x 190mm Depth 7-215(width) x 2-7/25(Height) x 7-12/25(Depth) Weight of the Main Unit: 2.87Ib. (1.30kg) Dimensions of the Remote Control unit: 43mm Width x 11 mm Height x 113mm Depth 1-2/3(Width) x 2/5(Height) x 4-2/5(Depth) Weight of the Remote Control Unit: 1.160z.
CONTENTS 1) BEFORE STARTING 2) PACKAGE CONTENTS 3) GENERAL CAUTIONS 4) CAUTIONS ON INSTALLATION 5) INSTALLING THE SOURCE UNIT 6) REMOVING THE SOURCE UNIT 7) WIRING AND CONNECTIONS 8) CONNECTING THE ACCESSORIES 18 18 18 19 19 21 22 23 1) Before Starting 1. This set is exclusively for use in cars with a negative ground 12 V power supply. 2. Read these instructions carefully. 3. Be sure to disconnect the battery "terminal" before starting. This is to prevent short circuits during installation.
4) Cautions on Installation 1. Prepare all articles necessary for installing the source unit before starting. 2. Install the unit within 30° of the horizontal plane. (Figure 2) 3. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand. 4. Use the enclosed screws for installation. Using other screws can cause damage. (Figure 3) Chassis Chassis ff·~:~age to ••••••••.• Max 30 Max. 6 mm (M5 screw) Figure 3 Figure 2 5) Installing the Source Unit 1.
Notes of installation 1. Before installation, please make sure proper connections are conducted and the unit operates normally. Improper connection may result in damage to the unit. 2. Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3. Before installation, please fasten all power cables. 4. DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head. 5.
MethodS 6) Removing the Source Unit Disassemble trim ring 1. Push the trim ring to right and pull out the right part. M5X6 2. Push the trim ring to left and pull out the left part. Mounting Frame Dashboard 1. Insert this unit directly to the opening of the dashboard. 2. Place M5x6 cylindrical screw through the holes of the mounting frame located inside the opening to holes of the unit and fasten the screws to left & right. Disassemble the unit 1. 2. 3. 4. Switch off the power. Remove the panel.
7) Wiring and Connections Black White r;=~.
16-Pin Connector Extension Lead (attched to the source unit) (fl Gray Front Right Brown wire (Phone mute lead) o Gray/Black Connect to cellular phone mute lead. (fl White Front Left o White/Black Yellow wire (Memory back-up lead) - - - - - Connect directly to battery (fl Purple Rear Right o Purple/Black (fl Green Rear Left Red wire (Power lead) - - - - - Accessory ® 12V o Green/Black ' - - - - - - -.......y , , - - - - - - - - - .
Clarion Co., Ltd. Todos los Derechos Reservados. Copyright@ 2009: Clarion Co., Ltd.
hEWS clarion~' GARANTIE LIMITEE DE 1 AN CLARION Pour Ie Canada et les Etats-Unis seulement Ce produit Clarion vendu par marchand autorise Clarion est garanti contre tous defauts de materiel et de mise en CEuvre pour une duree de un (1) an a compter de la date de vente initiale quand I'achat ET I'installation ont eM effectues chez un marchand autorise Clarion.
1-0639-00 2007/9 CLARION 1 YEAR LIMITED WARRANTY For USA and Canada only This Clarion product purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase, when purchased from AND installed by an authorized Clarion dealer.
