Owner’s manual Mode d’emploi Manual de instrucciones CZ109 CD/MP3/WMA RECEIVER AUTORADIO CD/MP3/WMA RECEPTOR CD/MP3/WMA
CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
English Thank you for purchasing this Clarion product. ∗ Please fully read this owner’s manual before operating this equipment. ∗ Check the contents of the enclosed warranty card and store it in a safe place with this manual. Contents 1. FEATURES ...................................................................................................................................... 3 2. PRECAUTIONS ...............................................................................................................
English 2. PRECAUTIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
. English 3. CONTROLS Names of the Buttons and Their Main Functions [RELEASE] [ [ ] [BND] [IR RECEIVER] [CD SLOT] ] (EJECT) [AUX] [SRC] [SOUND] [DISP] [ISR] [UP] [DN] [SCN] [RPT] [ROTARY] [RDM] [DIRECT] [RELEASE] button [RDM] button • Press to unlock DCP. • Perform random play while in CD/MP3/WMA mode. [ ] button • Perform preset scan while in the radio mode. • Play or pause a track while in CD/MP3/WMA mode.
English 4. DCP (DETACHABLE CONTROL PANEL) Removing the DCP 1. Press and hold the [SRC] button (1 sec.) to switch off power. 2. Press the [RELEASE] button. [RELEASE] button CAUTION • After removal, be careful not to drop the DCP or subject it to strong impacts, to prevent damage. • Once the [RELEASE] button is pressed and the DCP is unlocked, car vibrations can cause the DCP to fall. • The connector for the main unit and DCP is extremely important.
English ● Radio mode 5. REMOTE CONTROL [BND] button • Switches reception band. Functions of Remote Control Unit Buttons [x], [v] buttons • Change preset channels. [SCN] button ∗ Some buttons on the remote have different functions from those on the main unit. • Press for preset scan play. • Press and hold (2 sec.) for auto store. Signal transmitter ● CD/MP3/WMA modes [x], [v] buttons [SRC] [BND] • Press to select tracks. • Press and hold (1 sec.) for fast-forward/fastreverse.
English Inserting the Battery 1 Slide remote control unit’s rear cover in the direction shown. 2 Insert battery (CR2025) into insertion guides with printed side (+) up. 3 Press battery into compartment as shown. 4 Replace and slide cover until it clicks into place. 6. OPERATIONS Note: • Refer to the diagrams in “3. CONTROLS” (page 5) when reading this chapter. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or car’s ignition key.
Sound effects and tone can be adjusted as desired. To change sound settings 1. Press the [SOUND] button to switch to the sound adjustment display. ∗ The factory default sound setting is “ZEHCR+”. 2. Press [x] or [v] to select the sound adjustment mode. Each time [x] or [v] is pressed, the sound adjustment mode changes as follows: “Z-EHCR+” ↔ “BASS” ↔ “TREBLE” ↔ “BALANCE” ↔ “FADER” ↔ “NF VOL” ∗ When “ENT” is flashing in the display, press the [ ] button to adjust the setting value.
● Adjusting the balance English 2-1. Select “BALANCE”. 3-1. Turn the [ROTARY] knob to adjust balance between right and left speakers. ∗ The factory default setting is “CENTER”. (Adjustment range: RIGHT12 to LEFT12) ● Adjusting the fader 2-1. Select “FADER”. 3-1. Turn the [ROTARY] knob to adjust balance between front and rear speakers. ∗ The factory default setting is “CENTER”. (Adjustment range: FRONT12 to REAR12) Radio Operations Listening to broadcasts 1. Press the [SRC] button and select radio mode.
1. Use seek tuning or manual tuning to select the desired station. 2. Press and hold one of the [DIRECT] buttons (2 sec.) to store the current station in preset memory. Auto store The auto store function stores up to 6 stations automatically tuned in sequential order. If 6 stations cannot be found, any previously stored station remains in its memory position. 1. Press the [BND] button and select the desired band (FM/AM). 2. Press and hold the [ ] button (2 sec.).
English ● Number of files or folders 1. Up to 256 files can be recognized per folder. Up to 578 files can be played. 2. Tracks are played in the order they were recorded onto the disc. (Tracks may not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used for recording.
● Folder repeat play ● Track advance 1. Press the [v] button to move to the beginning of the next track. 2. Each time the [v] button is pressed, the track advances to the beginning of the next track. ● Track back 1. Press the [x] button to return to the beginning of the current track. 2. Press the [x] button twice to return to the beginning of the previous track. Repeatedly plays all tracks of the current folder on an MP3/WMA disc. 1. Press and hold the [RPT] button (1 sec.) for folder repeat play.
English Operations Common to Each Mode To change settings 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment display. 2. Press [x] or [v] to select the “item name” as follows: “CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR” ↔“SCROLL” ↔ “DIMMER” ↔ “TEL-SP” ↔ “TEL-SW” ∗ The adjustment item will be displayed for 2 seconds before showing the desired value. 3. Turn the [ROTARY] knob to select the desired value. ∗ When “ENT” is flashing in the display, press the [ ] button to adjust setting value. 4.
● Cell phone interrupt setting English If you connect this unit and your cell phone with an optional cable, you can listen to your calls on your car speakers. When the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT370) (sold separately): ∗ The factory default setting is “OFF”. 2-1. Select “TEL-SW”. 3-1. Turn the [ROTARY] knob to select setting.
General Problem Cause Measure Power does not turn on. (No sound) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your dealer. Incorrect wiring. Consult your dealer. No sound when operating the unit with amplifiers or power antenna attached. Power antenna lead is short circuited, or excessive current is required for remotely powering on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
English 8. ERROR DISPLAYS If an error occurs, one of the following messages is displayed. Take the measures described below to eliminate the problem. CD/MP3/WMA Error Display Cause Measure ERROR 2 A CD is caught inside the CD This is a failure of the CD deck mechanism. Consult deck and is not ejected. your dealer. ERROR 3 A CD cannot be played due to scratches, etc. ERROR 6 A CD is loaded upside-down Eject the disc and reload properly. inside the CD deck and does not play.
English 9. SPECIFICATIONS FM Tuner General Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Power Supply Voltage: 14.4 V DC (10.8 to 15.6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable) Weight / Source unit: 2.53 lb. (1.15 kg) Weight / Remote control unit: 1.41 oz.
Clarion Co., Ltd. 2008/10 All Rights Reserved. Copyright © 2008: Clarion Co., Ltd.
