Owner's manual Mode d'emploi Manual de instrucciones CZI09 CD/MP3IWMA RECEIVER AUTORADIO CD/MP3IWMA RECEPTOR CD/MP3IWMA
CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
Thank you for purchasing this Clarion product. * * Please fully read this owner's manual before operating this equipment. Check the contents of the enclosed warranty card and store it in a safe place with this manual. Contents 1. FEATURES 2. PRECAUTIONS 3. CONTROLS 3 4 5 Names of the Buttons and Their Main Functions 5 4. DCP (DETACHABLE CONTROL PANEL) 5. REMOTE CONTROL 6 7 Functions of Remote Control Unit Buttons inserting the Battery 7 8 8 8 6.
2. PRECAUTIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
3. CONTROLS Names of the Buttons and Their Main Functions ~-- [IR RECEIVER] [~] (EJECT) -....;-...c:....,::.. [~], [~]--=-....:.:..-... [ISR]---J [ROTARY] [RELEASE] button [ROM] button • Press to unlock OCP. • Perform random play while in CO/MP3IWMA mode. [~~I~] button • Perform preset scan while in the radio mode. • Play or pause a track while in CO/MP3IWMA mode. [RPn button • Perform repeat play while in CO/MP3IWMA mode.
4. DCP (DETACHABLE CONTROL PANEL) Removing the DCP 1. Press and hold the [SRC] button (1 sec.) to switch off power. 2. Press the [RELEASE] button. ~ [RELEASE) button ~ I • After removal, be careful not to drop the DCP or subject it to strong impacts, to prevent damage. • Once the [RELEASE] button is pressed and the DCP is unlocked, car vibrations can cause the DCP to fall. • The connector for the main unit and DCP is extremely important.
• Radio mode 5. REMOTE CONTROL [BND] button • Switches reception band. Functions of Remote Control Unit Buttons r [1+1I], [~] buttons • Change preset channels. [SCN] button * Some buttons on the remote have different • Press for preset scan play. functions from those on the main unit. • Press and hold (2 sec.) for auto store. Signal transmitter • CDIMP3/WMA modes [1+1I], [~] buttons • Press to select tracks. ~::::=:'K=====::::-~.
Inserting the Battery CD Slide remote control unit's rear cover in the direction shown. ® Insert battery (CR2025) into insertion guides with printed side (+) up. ® Press battery into compartment as shown. @ Replace and slide cover until it clicks into place. 6. OPERATIONS Note: • Refer to the diagrams in "3. CONTROLS" (page 5) when reading this chapter. Basic Operations Be sure to lower the volume before switching off the unit power or car's ignition key. The unit remembers its last volume setting.
Sound Adjustment Sound effects and tone can be adjusted as desired. button to return to the 3 -4 . Press the [ENT] ~/II previous mode. When set to "CUSTOM": To change sound settings 3-2. Press and hold the [;~I~] button (1 sec.). Bass/treble characteristics become flat and "FLAT' is show in the display. 1. Press the [SOUND] button to switch to the sound adjustment display. 3-3. Turn the [ROTARY] knob to change to the "OFF" mode. * The factory default sound setting is "ZEHCR+". 2.
• Adjusting the balance 2-1. Select "BALANCE". 3-1. Turn the [ROTARY] knob to adjust balance between right and left speakers. * The factory default setting is "CENTER". (Adjustment range: RIGHT12 to LEFT12) • Adjusting the fader 2-1. Select "FADER". 3-1. Turn the [ROTARY] knob to adjust balance between front and rear speakers. * The factory default setting is "CENTER". (Adjustment range: FRONT12 to REAR12) Radio Operations Listening to broadcasts 1. Press the [SRC] button and select radio mode. 2.
Manual memory 1. Use seek tuning or manual tuning to select the desired station. 2. Press and hold one of the [DIRECT] buttons (2 sec.) to store the current station in preset memory. Auto store The auto store function stores up to 6 stations automatically tuned in sequential order. If 6 stations cannot be found, any previously stored station remains in its memory position. 1. Press the [BND] button and select the desired band (FM/AM). 2. Press and hold the [~~,i] button (2 sec.).
• Number of files or folders Loading a CD 1. Up to 256 files can be recognized per folder. Up to 578 files can be played. 2. Tracks are played in the order they were recorded onto the disc. (Tracks may not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used for recording. 1. Insert a CD into the centre of the CD SLOT with label facing up. "LOADING" appears in the display, the CD enters the slot, and play begins.
Selecting a track • Folder repeat play • Track advance Repeatedly plays all tracks of the current folder on an MP3IWMA disc. 1. Press the [~] button to move to the beginning of the next track. 2. Each time the [~] button is pressed, the track advances to the beginning of the next track. • Track back 1. Press the [~] button to return to the beginning of the current track. 1. Press and hold the [RPT] button (1 sec.) for folder repeat play.
Operations Common to Each Mode To change settings 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment display. 2. Press [~] or [~] to select the "item name" as follows: "CLOCK" - "SETTINGS" - "SCRN SVR" -"SCROLL" - "DIMMER" - "TEL-SP" - ''TEL-SW'' * The adjustment item will be displayed for 2 seconds before showing the desired value. 3. Turn the [ROTARY] knob to select the desired value. * When "ENT' is flashing in the display, press the [:~I~ ] button to adjust setting value. 4.
• Cell phone interrupt setting If you connect this unit and your cell phone with an optional cable, you can listen to your calls on your car speakers. When the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT370) (sold separately): * The factory default setting is "OFF". 2-1. Select "TEL-SW". 3-1. Turn the [ROTARY] knob to select setting.
7. TROUBLESHOOTING Replace with a fuse of the same amperage. If the fuse blows again, consult your dealer. Power does not turn on. (No sound) Incorrect wiring. Consult your dealer. No sound when operating the unit with amplifiers or power antenna attached. Power antenna lead is short circuited, or excessive current is required for remotely powering on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
8. ERROR DISPLAYS If an error occurs, one of the following messages is displayed. Take the measures described below to eliminate the problem. A CD is caught inside the CD This is a failure of the CD deck mechanism. Consult your dealer. deck and is not ejected. A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc. A CD is loaded upside-down Eject the disc and reload properly. inside the CD deck and does not play.
9. SPECIFICATIONS FM Tuner General Frequency Range: 87.9 MHz to 107.9 MHz Power Supply Voltage: Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf 14.4 V DC (10.8 to 15.6 V allowable), negative ground Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Current Consumption: Less than 15 A Frequency Response (±3 dB): 30 Hz to 15 kHz Weight / Source unit: 2.53 lb. (1.15 kg) Speaker Impedance: 4 Q (4 Q to 8 Q allowable) Weight / Remote control unit: AM Tuner 1.41 oz.
Clarion Co., Ltd. 2008/10 All Rights Reserved. Copyright © 2008: Clarion Co" Ltd.
Printed In China I Impnme en Chine/lmpre"so:..;'"",,Ch:..;";;;' • - 1:'-' •••••• --..- . ~ -... .. ---:o2;::OO"'B/:..:',,' ..:2"'84"'-...:1"'37:..:8:..-0"'0::.... --, InstallationlWire Connection Guide Manuel d'installation et de connexion Gufa de instalaci6n/conexi6n de cables ........ ........ -1. BEFORE STARTING I PREPARATIFS I ANTES DE COMENZAR 1. This set is exclusively for use in cars with a 12 V power supply, negative ground. 2. Read these instructions carefully. 3.
• Montage fixe (TOYOTA, NISSAN et autres vehicules equipes ISOIDIN) • Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) Cel appareil est con~u pour une installation fixe dans Ie tableau de bordo 5i Ie vehicule est equipe d'un auto-radio insta1h!! I'usine, installer I'appareil pilote avec les pieces et les ecrous marquees de (*) (Figure 7), 5i Ie vehicule n'est pas equipe d'un auto-radio installe rusine se procurer un kit d'installalion pur installer I'appareil pilote avec la procedure suiva
IDiI . . . GIllllD -6. WIRE CONNECTIONS I CONNECTIQUE I CONEXION DE CABLES To external amplifier • To eliminate audio short drcuits, do not remove the caps of unused RCA cables. CAUTION: Please make sure when connecting external power amplifier. that you property. to the car chassis. ground the amplifier. If this Is not done, severe damage to the source unit may happen.
........ -7. SYSTEM EXAMPLE I EXEMPLE DE SYSTEME I EJEMPLO DESISTEMA • Example of the system using an external amplifier (Audio Visual) • Exemple de systeme utilisant un amplificateur exterieur. (audio-visuel) • Ejemplo de sistema utilizando un amplificador externo (audiovisual) • Example of AUX Sluetooth SS connection • Exemple de connexion AUX Sluetooth SS • Ejemplo de conexi6n de AUX Bluetooth SS ~ I I I I ---~--f-'------------- 6..
clarion GARANTIE LIMITEE DE 1 AN CLARION Pour Ie Canada et les Etats-Unis seulement Ce produit Clarion vendu par marchand autorise Clarion est garanti contre tous defauts de materiel et de mise en ceuvre pour une duree de un (1) an a compter de la date de vente initiale quand I'achat ET I'installation ont ete effectues chez un marchand autorise Clarion.
281-0639-00 2007/9 -"U·"t"1" clarion CLARION 1 YEAR LIMITED WARRANTY For USA and Canada only This Clarion product purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase, when purchased from AND installed by an authorized Clarion dealer.
