Owner’s manual Mode d’emploi Bedienungsanleitung Istruzioni per l’uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções CZ109E CZ109ER CZ109EG CD/MP3/WMA RECEIVER AUTORADIO CD/MP3/WMA CD/MP3/WMA-RECEIVER SINTOLETTORE CD/MP3/WMA CD/MP3/WMA-RADIO-COMBINATIE RECEPTOR CD/MP3/WMA CD/MP3/WMA-RADIO RECEPTOR CD/MP3/WMA
CAUTIONS: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.
English Thank you for purchasing this Clarion product. ∗ Please fully read this owner’s manual before operating this equipment. ∗ Check the contents of the enclosed warranty card and store it in a safe place with this manual. Contents 1. FEATURES ...................................................................................................................................... 3 2. PRECAUTIONS ...............................................................................................................
. English 3. CONTROLS Names of the Buttons and Their Main Functions [RELEASE] [ [ ] [BND] [CD SLOT] ] (EJECT) [AUX] [SRC] [SOUND] [DISP] [TA] [UP] [DN] [SCN] [RPT] [ROTARY] [RDM] [DIRECT] [RELEASE] button [RDM] button • Press to unlock DCP. • Perform random play while in CD/MP3/WMA mode. [ ] button • Perform preset scan while in the radio mode. • Play or pause a track while in CD/MP3/WMA mode.
Removing the DCP 1. Press and hold the [SRC] button (1 sec.) to switch off power. 2. Press the [RELEASE] button. [RELEASE] button English 4. DCP (DETACHABLE CONTROL PANEL) CAUTION • After removal, be careful not to drop the DCP or subject it to strong impacts, to prevent damage. • Once the [RELEASE] button is pressed and the DCP is unlocked, car vibrations can cause the DCP to fall. • The connector for the main unit and DCP is extremely important.
English 5. OPERATIONS Note: • Refer to the diagrams in “3. CONTROLS” (page 4) when reading this chapter. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or car’s ignition key. The unit remembers its last volume setting. Turning power on/off 1. Press the [SRC] button to turn on power. 2. Press and hold the [SRC] button (1 sec.) to turn off power. Selecting modes 1. Press the [SRC] button to change operation mode. 2.
● Adjusting the balance ● Adjusting the bass ● Adjusting the fader This adjustment is supported only when Z-Enhancer Plus is set to “CUSTOM”. 2-1. Select “BASS”. 3-1. Press the [ ] button. 3-2. Press [x] or [v] to change and select settings as follows: “B” ↔ “B” ↔ “Q 1” 3-3. Turn the [ROTARY] knob to adjust values for gain, F (center frequency) and Q curve. B :The factory default setting is “0”. (Adjustment range: +7 to –7) B :The factory default setting is “60”.
English Radio Operations ● Step tuning Press [x] or [v] to manually tune a station. Listening to broadcasts ∗ If no operation is performed for 7 seconds or more, manual tuning is cancelled and the display returns to the previous mode. 1. Press the [SRC] button and select radio mode. ∗ PS: Programme service name ∗ PTY: Programme type 2. Press the [BND] button and select the reception band.
RDS (Radio Data System) This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. When using the RDS function, always set the radio to FM mode. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. 1. Press and hold the [DISP] button (1 sec.) to switch to the RDS adjustment selection display. 2. Press [x] or [v] to select “REG”. 3. Turn the [ROTARY] knob to select “ON” or “OFF”.
English ● Setting the TA standby mode If you press the [TA] button when only “TP” appears in the display, “TP” and “TA” appear in the display and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode.
1. Press and hold the [DISP] button (1 sec.) to switch to the RDS adjustment selection display. 2. Press [x] or [v] to select “PTY SEL”. 3. Press the [ ] button. 4. Turn the [ROTARY] knob to select the desired PTY. 29 types of PTY can be selected. 5. If you press and hold any of the [DIRECT] buttons ( 2 sec.), the selected PTY is stored into that preset channel memory. Emergency broadcast If an emergency broadcast is received, all the function mode operations are stopped.
English ● Number of files or folders 1. Up to 256 files can be recognized per folder. Up to 578 files can be played. 2. Tracks are played in the order they were recorded onto the disc. (Tracks may not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used for recording. Ejecting a CD 1. Press the [Q] button to eject the CD. Take it out from the ejected position. “EJECT” appears in the display.
Select a folder containing MP3/WMA files and begins playing the first track in the folder. 1. Press [UP] or [DN]. Press the [UP] button to move to the next folder. Press the [DN] button to move to the previous folder. 2. To select a track, press [x] or [v]. Other play modes ● Scan play This function locates and plays the first 10 seconds of all tracks recorded on a disc. 1. Press the [SCN] button for scan play.
English ● Setting title scroll method ● Cell phone interrupt setting Set how to scroll in CD-TEXT and MP3/WMA titles. If you connect this unit and your cell phone with an optional cable, you can listen to your calls on your car speakers. When the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT373) (sold separately): ∗ The factory default setting is “ON”. 2-1. Select “SCROLL”. 3-1. Turn the [ROTARY] knob to select “ON” or “OFF”. • ON: Scroll automatically. • OFF: Scroll 1 time only.
General Problem Cause Measure Power does not turn on. (No sound) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your dealer. Incorrect wiring. Consult your dealer. No sound when operating the unit with amplifiers or power antenna attached. Power antenna lead is short circuited, or excessive current is required for remotely powering on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
If an error occurs, one of the following messages is displayed. Take the measures described below to eliminate the problem. Error Display CD/MP3/WMA English 7. ERROR DISPLAYS Cause Measure ERROR 2 A CD is caught inside the CD This is a failure of the CD deck mechanism. Consult deck and is not ejected. your dealer. ERROR 3 A CD cannot be played due to scratches, etc. ERROR 6 A CD is loaded upside-down Eject the disc and reload properly. inside the CD deck and does not play.
TEL :+49-6105-977-0 FAX :+49-6105-977-399 CE DECLARATION o f CONFORMITY We Clarion Europa GmbH (supplier's name) Hessenring 19-21, 64546 Mörfelden-Walldorf, GERMA NY (address) declare under our sole responsibility that the product CAR RADIO with CD PLAYER MODEL: CZ109E,CZ109ER,CZ109EG Product code:PE3160 (difference:illumination) TYPE: 1043207A (name, type or model, possibly sources and numbers of items) to which this declaration relates is in conformity with the following stan