CZ509_ENG.
CZ509_ENG.book Page 2 Tuesday, January 13, 2009 10:20 AM CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic products. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website.
CZ509_ENG.book Page 3 Tuesday, January 13, 2009 10:20 AM English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES ...................................................................................................................................... 3 2. PRECAUTIONS ..................................................
CZ509_ENG.book Page 4 Tuesday, January 13, 2009 10:20 AM English 2. PRECAUTIONS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CZ509_ENG.book Page 5 Tuesday, January 13, 2009 10:20 AM Handling Compact Discs This unit uses a flip-down structure that makes possible large-size displays. • Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. • Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.
CZ509_ENG.book Page 6 Tuesday, January 13, 2009 10:20 AM English 3. CONTROLS Names of the Buttons and Their Main Functions [DISP] [OPEN ] [ [BND] [IR RECEIVER] [AUX] ] [SRC] [ISR] [ ], [ [SOUND] [SCN] [RPT] [ROTARY] ] [RDM] [DIRECT] With the FLIP DOWN PANEL opened [Q] (EJECT) [CD SLOT] [OPEN] button [DIRECT] buttons • Deeply push in [OPEN] button to unlock the flip down panel. • Store radio stations in memory or recall it directly while in radio mode.
CZ509_ENG.book Page 7 Tuesday, January 13, 2009 10:20 AM Names of the Buttons and Their Main Functions English [ROTARY] knob • Rotate to adjust the volume. [ISR] button • Recall ISR radio station in memory. • Press and hold the button (2 sec.) to store current station into ISR memory (radio mode only). [SRC] button • Turn the power on/off. [x], [v] buttons • Commence fast-forward or fast-reverse mode. [ ] button • Perform preset scan while in the radio mode.
CZ509_ENG.book Page 8 Tuesday, January 13, 2009 10:20 AM English 4. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. 2. Insert the left side of the DCP into the main unit. 2. Removing the DCP 1. Press the [SRC] button (1 sec.) to turn off the power. 2. Deeply push in [OPEN] button to unlock the flip down panel.
CZ509_ENG.book Page 9 Tuesday, January 13, 2009 10:20 AM English 5. REMOTE CONTROL Functions of Remote Control Unit Buttons ∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main unit. Signal transmitter ● Radio/Satellite Radio modes [BND] button • Switches reception band. [x], [v] buttons [SRC] [BND] [MUTE] [DISP] [ISR] [RDM] [SCN] [RPT] • Moves preset channels up and down. [SCN] button • Press to perform preset scan.
CZ509_ENG.book Page 10 Tuesday, January 13, 2009 10:20 AM Functions of Remote Control Unit Buttons English ● CD changer mode [RDM] button [BND] button • Press to perform random play. • Press and hold the button (1 sec.) to perform disc random play. • Press to switch to next disc in ascending order. [x], [v] buttons • Press to move the tracks up and down. • Press and hold the button (1 sec.) to perform fast-forward/fast-backward. [ ] button • Switches between playback and pause.
CZ509_ENG.book Page 11 Tuesday, January 13, 2009 10:20 AM English 6. OPERATIONS Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. Turning on/off the power Note: 1. Press the [SRC] button to turn on the power. 2. Press and hold the [SRC] button (1 sec.) to turn off the power for the unit.
CZ509_ENG.book Page 12 Tuesday, January 13, 2009 10:20 AM Basic Operations English 3-1. Each time you press the [ ] or [ ] button, the tone effect changes in the following order: “CUSTOM” ↔ “EXCITE” ↔ “IMPACT” ↔ “B-BOOST” ↔ “OFF” CUSTOM : user custom EXCITE : bass and treble emphasized mid emphasized IMPACT : bass and treble emphasized B-BOOST : bass emphasized OFF : no sound effect When “CUSTOM” is set: 3-1. Press the [ ] button. 3-2.
CZ509_ENG.book Page 13 Tuesday, January 13, 2009 10:20 AM Basic Operations ● Adjusting the subwoofer output volume You can adjust the volume output from the unit’s subwoofer output terminal. 2-1. Select “S-W VOL”. 3-1. Press the [ ] or [ ] button to increases or decreases the subwoofer volume. ∗ The factory default setting is “0”. (Adjustment range: +6 to –6) ● Adjusting the high pass filter 2-1. Select “HPF”. 3-1. Each time you press the [ ] or [ ] button to select the setting.
CZ509_ENG.book Page 14 Tuesday, January 13, 2009 10:20 AM Radio Operations English Listening to the radio Auto store 1. Press the [SRC] button and select the radio mode. 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
CZ509_ENG.book Page 15 Tuesday, January 13, 2009 10:20 AM CD/MP3/WMA/AAC Operations ● To disable DRM (Digital Rights Management) 1. When using Windows Media Player 9/10/11, click on TOOL ➜ OPTIONS ➜ MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility. 2.
CZ509_ENG.book Page 16 Tuesday, January 13, 2009 10:20 AM CD/MP3/WMA/AAC Operations English Disc-In-Play function Loading a CD As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on. 1. Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL. 2. Insert a CD into the center of the CD SLOT with the labeled side facing up.
CZ509_ENG.book Page 17 Tuesday, January 13, 2009 10:20 AM CD/MP3/WMA/AAC Operations Selecting a track ● Track-up 1. Press the [v] button to move ahead to the beginning of the next track. 2. Each time you press the [v] button, the track advances ahead to the beginning of the next track. ● Track-down 1. Press the [x] button to move back to the beginning of the current track. 2. Press the [x] button twice to move back to the beginning of the previous track.
CZ509_ENG.book Page 18 Tuesday, January 13, 2009 10:20 AM CD/MP3/WMA/AAC Operations English ● Random play This function allows you to play all tracks recorded on a disc in a random order. 1. Press the [RDM] button to perform random play. ● Folder random play This function allows you to play all the tracks of all the folders recorded on an MP3/WMA/AAC disc in a random order. 1. Press and hold the [RDM] button (1 sec.) to perform folder random play. ● To cancel play 1.
CZ509_ENG.book Page 19 Tuesday, January 13, 2009 10:20 AM Bluetooth Operations Notes: • Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction. In addition, if leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction. • This system will not operate or may operate improperly with some Bluetooth audio players.
CZ509_ENG.book Page 20 Tuesday, January 13, 2009 10:20 AM Bluetooth Operations English ● Redial a call You can call a redial phone No. 1. Press the [BND] button to select “REDIAL”. 2. Press and hold the [ ] button (1 sec.) to call the redial phone No. ∗ Press the [SOUND] button to end the call. To change Bluetooth adjustment setting 1. Press and hold the [DISP] button (1 sec.) to switch to the Bluetooth adjustment selection display. 2. Press the [x] or [v] button to select the “item name”.
CZ509_ENG.book Page 21 Tuesday, January 13, 2009 10:20 AM Bluetooth Operations This option is used to add one of the phone No. 2-1. Select “ADD PHONE BOOK”. 3-1. Press the [ ] button (1 sec.), then the “RECEIVING” appears in the display. ∗ At the same time the phone No. from the paired phone book list is sent out, then there is a prompt on the mobile phone if it is successful. ∗ Some mobile phones cannot transfer the phone book to this unit because of the less word and the language type.
CZ509_ENG.book Page 22 Tuesday, January 13, 2009 10:20 AM Bluetooth Operations English ● AUTO ANS ● Bluetooth Firmware version This is a setting to determine whether any incoming call will be automatically or manually answered. This will display the Firmware version of the Bluetooth. 2-1. Select “BT FW”. The Bluetooth Firmware version appears in the display. ∗ The factory default setting is “OFF”. 2-1. Select “AUTO ANS”. 3-1. Press the [ ] or [ ] button to select “ON” or “OFF”.
CZ509_ENG.book Page 23 Tuesday, January 13, 2009 10:20 AM Operations Common to Each Mode 1. Press and hold the [DISP] button (1 sec.) to switch to the adjustment selection display. 2. Press the [x] or [v] button to select the “item name”. “CLOCK” ↔ “CONTRAST” ↔ “SETTINGS” ↔ “SCRN SVR” ↔ “MESSAGE INPUT” ↔ “SCROLL” ↔ “DIMMER” ↔ “BLINKLED” ↔ “A-CANCEL” ↔ “SYSTEM CHECK” 3. Press the [ ] or [ ] button to select the “desired setting value”.
CZ509_ENG.book Page 24 Tuesday, January 13, 2009 10:20 AM Operations Common to Each Mode English 3-4. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order: Capital letters ➜ Numbers ➜ Symbols ➜ Capital letters… 3-5. Press the [ ] or [ ] button to select the desired character. 3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message. 3-7. Press and hold the [ ] button (2 sec.) to store the message in memory.
CZ509_ENG.book Page 25 Tuesday, January 13, 2009 10:20 AM Operations Common to Each Mode English 8. Press the [ ] or [ ] button to select the desired character. 9. Repeat steps 6 to 8 to enter up to 10 characters for the title. 10.Press and hold the [ ] button (2 sec.) to store the title into memory. Clearing titles 1. Select and play a CD in the CD changer or tune in to Radio for which you want to clear the title. 2. Press and hold the [DISP] button (1 sec.). 3.
CZ509_ENG.book Page 26 Tuesday, January 13, 2009 10:20 AM English 7. ACCESSORIES USB/MTP Operations USB memory/MTP device operation Note: • The following operations are the same as for CD mode: ∗Pause ∗Track selection ∗Fast-forward/fast-backward (Except DRM file) ∗Top function ∗List search ∗Scan play ∗Repeat play ∗Random play ∗Folder selection See “CD/MP3/WMA/AAC Operations” (page 1517) for details. • • • • through a USB hub device are also not supported.
CZ509_ENG.book Page 27 Tuesday, January 13, 2009 10:20 AM USB/MTP Operations Connecting a USB memory/MTP device 1. Connect the USB memory/MTP device to the USB cable. Playback will begin from the first file recorded on the device. ∗ If the device is not recognized, press the [SRC] button to switch the source to the device. ∗ Always insert the device fully into the connector. Incomplete connections may cause the device not to be recognized.
CZ509_ENG.book Page 28 Tuesday, January 13, 2009 10:20 AM iPod Operations English This section describes operations when connected to an Apple iPod via the USB cable. Notes: • See the iPod Owner’s Manual for details regarding operation conditions. • The unit will not operate, or may operate improperly with unsupported versions. • For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com.
CZ509_ENG.book Page 29 Tuesday, January 13, 2009 10:20 AM iPod Operations Play all tracks within a selected category, in random order. (Corresponds to “Shuffle (Songs)” command on iPod.) 1. Press and hold the [RDM] button (1 sec.). ● To cancel play 1. Press the same play button once again. Notes: • When the repeat play mode is canceled, after play all tracks within a selected category, playback will begin from the first track in the selected category.
CZ509_ENG.book Page 30 Tuesday, January 13, 2009 10:20 AM iPod Operations English In this case, use the [ ] and [ ] buttons to switch between subfolders, then use the [v] button to select the desired subfolder. 3. When the track name display is showing, press the [v] button. Playback will begin from the first track in the selected category, and the iPod menu mode will be canceled. ∗ Use the [ ] and [ ] buttons to select a track within a category.
CZ509_ENG.book Page 31 Tuesday, January 13, 2009 10:20 AM Satellite Radio Operations Notes: • When the function is differ depending to the connected receiver, they are distinguished by the following notations: “XM”: for an XM Satellite Radio Receiver “SIRIUS”: for a SIRIUS Satellite Radio Receiver • XM and the XM logos are trademarks of XM Satellite Radio Inc. Selecting a Satellite Radio mode 1. Press the [SRC] button. The system changes to the specified Satellite Radio mode. Selecting a band 1.
CZ509_ENG.book Page 32 Tuesday, January 13, 2009 10:20 AM Satellite Radio Operations English Preset memory 1. Press the [BND] button to select the desired band. 2. Select the desired channel with quick tuning or step tuning. 3. Press and hold the [DIRECT] button (2 sec.) to store the current channel into preset memory. Receiving stations selected by category Satellite Radio allows you to select broadcast channel category (contents). 1. Press and hold the [BND] button (1 sec.
CZ509_ENG.book Page 33 Tuesday, January 13, 2009 10:20 AM CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [SRC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [SRC] button to select the CD changer for play. ∗ If “NO MAG” appears in the display, insert the magazine into the CD changer.
CZ509_ENG.book Page 34 Tuesday, January 13, 2009 10:20 AM Problem General English 8. TROUBLESHOOTING Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is 1. Turn the unit off. shorted to ground or 2.
CZ509_ENG.book Page 35 Tuesday, January 13, 2009 10:20 AM Problem CD/MP3/WMA/AAC Measure English No sound heard Cause MP3/WMA/AAC files are absent in a disc. Write MP3/WMA/AAC files onto the disc properly. Files are not recognized as an MP3/WMA/AAC file. Use MP3/WMA/AAC files encoded properly. File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file system. Compact disc is dirty. Clean the compact disc with a soft cloth.
CZ509_ENG.book Page 36 Tuesday, January 13, 2009 10:20 AM If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. CD changer CD/MP3/WMA/AAC Error Display USB/MTP/iPod English 9. ERROR DISPLAYS Cause Measure ERROR 2 A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult deck and is not ejected. your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc.
CZ509_ENG.book Page 37 Tuesday, January 13, 2009 10:20 AM FM Tuner Audio Frequency Range: 87.9 MHz to 107.
CZ509_ENG.book Page 38 Tuesday, January 13, 2009 10:20 AM English 11.OTHERS WMDRM 10 for devices • This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. • Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. This device uses WMDRM software to access WMDRM-protected content.
CZ509_SP.book Page 120 Tuesday, January 13, 2009 10:36 AM Clarion Co., Ltd. 2008/12 All Rights Reserved. Copyright © 2008: Clarion Co., Ltd.