Operation Manual

280-8302-00
DB268RMP/BD269RMP/BD269RGMP 13
English
Basic Operations
Adjusting telephone interrupt
setting
This unit requires special wiring to mute the
audio signal automatically when a cellular
telephone rings in the car.
∗ This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
∗ The factory default setting is “TEL OFF”.
1. Press the [D] button and press [å]/[∂]
button to select “TEL-SW”.
2. “TEL ON” or “TEL OFF” will be display after
2 seconds.
3. Turn the [ROTARY] knob clockwise to turn
on the telephone interrupt or
counterclockwise to turn off the telephone
interrupt.
∗ During telephone interrupt, the display shows
“TEL”.
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS appears in the
display.
∗ PS: Programme service name
2. To select a preset band, press the [BND]
button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
the [BND] button is pressed, the display will
change as:
F1 ➜ F2 ➜ F3 ➜ AM ➜ F1...
3. Press the [å] or [∂] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [BND] button and select the
desired band (FM or AM (MW/LW)).
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
∗ If “TA” is lit in the display, TP stations are
automatically sought.
● DX SEEK
Press the [å] or [∂] button to automatically
seek a station.
When the [∂] button is pressed, the station is
sought in the direction of higher frequencies; if
the [å] button is pressed, the station is sought
in the direction of lower frequencies.
∗ When seek tuning starts, “DX” appears in the
display.
● LOCAL SEEK
If you press and hold the [å] or [∂] button
for 1 second or longer, local seek tuning is
carried out.
Broadcast stations with good reception
sensitivity are selected.
∗ When local seeking starts, “LO” appears in the
display.