Specifications

147
UNGO – Programming Guide
SR5000 (2-Way Remote Start with Security Combo)
MENU 1
Feature Default LED ON LED OFF Setting
Number (Press Channel 1) (Press Channel 2)
1-1 Active Arming Passive Arming
1-2 Chirps ON Chirps OFF
1-3 Ignition Control Door Locks ON Ignition Control Door Locks OFF
1-4 Active Locking Passive Locking
1-5 Panic with Ignition ON Panic with Ignition OFF
1-6 Door Lock Pulse Duration 0.8 Seconds Door Lock Pulse Duration 3.5 Seconds
1-7 Forced Passive Arming ON Forced Passive Arming OFF
1-8 Automatic Engine Disable ON Automatic Engine Disable OFF
1-9 Armed When Driving Anti-Carjacking System
1-10 Anti-Code Grabbing ON Anti-Code Grabbing OFF
MENU 2
Feature Default LED ON LED OFF Setting
Number (Press Channel 1) (Press Channel 2)
2-1 Siren Output Constant Siren Output Pulsed
2-2 30-Second Siren Duration 60-Second Siren Duration
2-3 False Alarm Prevention Circuitry ON False Alarm Prevention Circuitry OFF
2-4 Progressive Door Trigger Instant Door Trigger
2-5 Override Switch Input: 1 Pulse (1)* Override Switch Input: 2 (2)*, 3 (3)*, 4 (4)*, 5 (5)*
2-6 Open Zone Bypass Notice ON Open Zone Bypass Notice OFF
2-7 Ignition Controlled Dome Light ON Ignition Controlled Dome Light OFF
2-8 Single Unlock Pulse Double Unlock Pulse
2-9 FAD with Channel 2 ON FAD with Channel 2 OFF
2-10 Channel 4: Validity (1)* Channel 4: Latched/Latched (2)*, Reset with
Ignition (3)*, 30-Second Timed (4)*, 60-Second
Timed (5)*, 90-Second Timed (6)*
MENU 3
Feature Default LED ON LED OFF Setting
Number (Press Channel 1) (Press Channel 2)
3-1 Engine Check ON Engine Checking OFF
3-2 Tachometer Sensing Voltage Sensing
3-3 12 Minute Run Time (1)* 24 Min (2)*, 60 Min Run Time (3)*
3-4 Flashing Parking Light Output Constant Parking Light Output
3-5 Cranking Time 0.6 Sec. (1)* Crank Time 0.8 (2)*, 1.0 (3)*, 1.2 (4)*, 1.4 (5)*,
1.6 (6)*, 1.8 (7)*, 2.0 (8)*, 4.0 (9)*
3-6 Voltage Check Level High Voltage Check Level Low
3-7 Auxiliary Output: Factory Alarm Disarm Special Accessory
3-8 Status Output Factory Alarm Rearm
3-9 Anti-Grind ON Anti-Grind OFF
Note: Factory default settings are shown BOLD.
Note: * The number in parentheses indicate the number of times the LED will flash.