Specifications

150
UNGO – Remote Programming
MENU 2
Feature Default LED ON LED OFF Setting
Number (Press Channel 1) (Press Channel 2)
2-1 Engine Check ON Engine Checking OFF
2-2 Tachometer Sensing Voltage Sensing
2-3 12 Minute Run Time (1)* 24 Min (2)*, 60 Min Run Time (3)*
2-4 Flashing Parking Light Output Constant Parking Light Output
2-5 Cranking Time 0.6 Sec. (1)* Crank Time 0.8 (2)*, 1.0 (3)*, 1.2 (4)*, 1.4 (5)*,
1.6 (6)*, 1.8 (7)*, 2.0 (8)*, 4.0 (9)*
2-6 Voltage Check Level High Voltage Check Level Low
2-7 Short Run (Turbo Timer): 1 Min. (1)* Short Run (Turbo Timer): 3 (2)*, 5 (3)*, 10 (4)*
2-8 Activation Pulse: 1 (1)* Activation Pulses: 2 (2)*, 3 (3)*
2-9 2nd Ignition Output 2nd Accessory Output
2-10 Accessory State During Wait to Start: OFF Accessory State During Wait to Start: ON
2-11 2nd Status Output: Normal (1)* Rear Defogger Latched (2)*, Pulsed (3)*
2-12 Anti-Grind ON Anti-Grind OFF
Note: Factory default settings are shown BOLD.
Note: * The number in parentheses indicate the number of times the LED will flash.
Remote Programming