Specifications

167
Hours). The devices under test must pass with-
out discolouring, fading, chalking or cracking.
7-inch speakers
Clarion's line of 7-inch diameter speakers set new
standards for marine entertainment. These speak-
ers were designed using the same strict toleranc-
es as our 6.5-inch speakers, but offer improved
efficiency, as well as improved bass output thanks
to a 35% increase in cone area.
The results of our efforts is a speaker that is 3dB
more efficient with dramatically improved low
frequency extension and smooth band to band
performance.
Sport Series Speakers
The Sport Series of speakers were introduced to
add options to your purchase. If you are looking
for aggressive style with the same proven marine
performance you’ve come to expect from Clarion,
then the Sport Series CMCX7.1s 7-inch coaxial
and CMSW10.1s 10” subwoofer are the perfect
choice.
Marine Audio – Technologies
The Industry Reference
Once again raising the performance bar, Clarion
Marine is set to unleash a line of marine speak-
ers that will satisfy anyone’s need for sonic
purity. The line starts with Clarion’s CM1635, an
audiophile-grade component speaker system
that boasts a mid-woofer cone, titanium-coated
tweeter and an integrated crossover. The pure
sound radiating from this speaker combination is
further enhanced by the tweeter’s ability to pivot,
allowing you to accurately direct the sound where
you need it most. Rounding out Clarion’s marine
line is its high-performance coaxial speakers,
and its 10" subwoofers.
Nobody understands the marine audio environ-
ment like Clarion - we invented the category
and remain the industry leader. As part of our
ongoing commitment to offering products that
will withstand the test of time, we follow certain
testing guidelines to ensure reliable, trouble-free
performance.
ASTM B117 - Salt and Fog Exposure Testing
Standard
This test was created to evaluate a products
corrosion resistance over extended exposure
to salt water. The test involves subjecting a
device (speaker for example) to a spray in a
closed chamber of a solution of NaCl ranging
in concentration from 3.5 to 20%. The second
part of the test involves bubbling compressed
air through a humidifying tower containing hot
de-ionized water. This recreates a condition of
100% humidity. Clarion products subjected to
these tests must pass without corrosion, dam-
age or failure.
ASTM D4329 - UV Exposure Testing
This testing standard describes an evaluation
of the damaging effects of long term outdoor
UV exposure. The test subjects must withstand
alternating cycles of 8 hours of ultraviolet light
exposure at 70 degrees Celsius, followed by 4
hours of condensation at 50 degrees Celsuis,
then repeated for extended periods of time
in multiples of 500 hours per test (up to 2000