Owner`s manual
Basic
Operations
I
Adjusting
the DZE
level
You can adjust the DZE level in 3 steps and
register each adjustment respectively.
This adjustment can only be performed when the
DZE is set to "DZE-1
",
"DZE-2" or "DZE-3".
:;,
The factory default setting
is
"0"
(Adjustment range:
-3
to +3).
1.
Press the [A-M] button and select "OZE
LEVEL".
2.
Turn the [ROTARY] knob to adjust the level.
3.
When the adjustment
is
complete, press the
[A-M] button several times until the function
mode
is
reached.
3.
Press the [.......] or [.......] button.
4.
Turn the [ROTARY] knob to select seat
position. The adjustment items you can select
as follows:
•
"SEAT
F-L" : front left seat
•
"SEAT
F-R" : front right seat
•
"SEAT
REAR":
rear seats
* The factory default setting is "SEAT F-L".
5.
When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting
the
bass
(Gain,
Frequency, Q-curve)
This adjustment can be performed when the DZE
is
set to "DZE-OFF".
1.
Press the [A-M] button and select "BASS".
2.
Turn the [ROTARY] knob clockwise to
emphasize the bass; turning it
counterclockwise attenuates the bass.
* The factory default setting
is
"B<GAIN
0>"
(Adjustment range:
-6
to
+8).
3.
Press the
[~]
or
[.......-t]
button to select
"B<FREQ 50>".
Turn the
[ROTARYl
knob and select the
frequency.
* The factory default setting
is
"B<FREQ 50>"
(Adjustment options: 50/80/120
Hz).
4.
Press the [.......]
or
[.......-t]
button to select
"B<Q 1.00>".
Turning the [ROTARY] knob and select the Q-
curve.
* The factory default setting
is
"B<O 1.00>"
(Adjustment options: 1.00/1.25/1.50/2.00).
5.
When the adjustment
is
complete, press the
[A-M] button several times until the function
mode
is
reached.
Setting
the DZE
(Digital
Z-Enhancer)
This unit is provided with 3 types of sound tone
effects stored
in
memory. Select the one you
prefer.
:;,
The factory default setting
is
"DZE-OFF",
Each time you press the [DIGITAL Z-EHCR]
button, the tone effect changes
in
the following
order:
"DZE-1"
-.
"OZE-2"
-.
"DZE-3"
-.
"DZE-OFF"
-.
"DZE-l
"
...
•
"DZE-l"
• "DZE-2"
• "DZE-3"
: suitable for the coaxial speakers
: suitable for separate speakers
: moderate effect compared to
"DZE-l"
"DZE-2"
• "DZE-OFF": no sound effect
Notes:
•
The
volume changes each time the OZE setting
is
switched.
• Sufficient effects cannot
be
obtained with some
speaker systems.
In
such cases, adjust the
volume.
Adjusting
the
tone
1.
Press the [A-M] button and select the item to
adjust.
2.
Each time you press the [A-M] button, the
item changes as following order:
.When
"DZE-l
",
"DZE-2"
or
"DZE-3"
is
set
"LPO"
-.
"DZE LEVEL"
-.
"BALANCE"
-.
"FADER"
-.
Last
function
mode
...
•
When
"DZE-OFF"
is
set
"LPO"
-.
"BASS"
-.
"TREBLE"
-.
"BALANCE"
-.
"FADER"
-.
Last
function
mode
...
Notes:
•
The
display automatically returns
to
the previous
mode.
Adjusting
the
LPO
(Listening
Position
Optimizer)
This
is
the function that virtually optimizes the
speaker distances of each type of a car to the
listening position, which realizes the clearer
soundstage.
The setting value has to be adjusted to the
listening position and the type of your car.
* The factory default setting
is
'TYPE OFF".
1.
Press the [A-M] button and select "LPO".
2.
Turn the [ROTARY] knob to select the car
type. The adjustment options you can select
are as follows:
• "TYPE OFF" : no car type selected
• "TYPE
CMPCT":
suitable for compact
car
• "TYPE
SEDAN"
: suitable for sedan
• "TYPE 1
BOX"
: suitable for van
DFZ675MC 13