Owner`s manual
Common
Operations
Display
Adjust
Mode
I
Setting
the
clock
1.
Press and hold the
[0]
button for 1 second
or
longer to switch to the adjust mode.
2.
Press the [
..........
]
or
[~I]
button to select
"CLOCK
[3".
3.
Press the r-II] button.
4.
Press the
[I
..........
] or
[~]
button to select the
hour
or
the minute.
5. Turn the
[ROTARY]
knob and set the correct
time.
* The clock is displayed
in
12-hour format.
6. Press the
r--II]
button to store the time into
memory.
7.
Press the
[0]
button to return to the previous
mode.
Notes:
'"
You
cannot
set
the clock when it is displayed with
only the ignition
on.
If
you drain
or
remove the car's
battery
or
take out this unit, the clock is reset.
While setting the clock,
if
another button
or
operation
is
selected, the clock set mode
is
canceled.
Turning
the
screen
saver
function
on
or
off
This unit is provided with the screen saver
function which allows you to
show
various kinds
of patterns and characters
in
the Operation
Status indication area of the display. You can
turn on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
* The factory default setting
is
"ON".
1.
Press and hold the
[0]
button for 1 second or
longer to switch to the adjust mode.
2.
Press the [
..........
] or
[~]
button to select
"SCRN SVR".
3.
Turn the [ROTARY] knob and select
"5S
OFF", "SS ON"
or
"S5
MESSAGE".
4.
Press the
[0]
button to return to the previous
mode.
Entering
MESSAGE INFORMATION
When the use
of
the message
is
selected for the
screen
saver
setting, you can change the
contents of the message.
*
Up
to
30 characters can
be
entered.
The factory default setting
is
"Welcome
to
Clarion".
1. Press and hold the
[OJ
button for 1 second or
longer to switch to the adjust mode.
2. Press the [
..........
]
or
[~I]
button to select
"MSG
INPUT
[3".
3.
Press the r-II] button.
4. Press the
[I
..........
]
or
[~I]
button to move the
cursor.
5.
Press the [BND] button to select a character.
Each time you press the
[BND]
button, the
character changes
in
the follOWing orders:
Capital letters
-+
Small letters
-+
Numbers
and Symbols
-+
Umlaut
-+
Capital letters...
6.
Turn the
[ROTARY]
knob to select the desired
character.
7. Repeat step 4 to 6 to enter up to 30 characters
for message.
8.
Press and hold the r-II] button
for
2 seconds
or
longerto
store the message in memory and
cancel input message mode.
"'
Press and hold the [BND] button for 1 second
or longer
can
cancel the input message. Then
press and hold the
[--.u
button for 2 seconds or
longer to store the message and the message
return to default setting.
9.
Press the
[0]
button to return to the previous
mode.
Setting
the
method
for
title
scroll
Set
how
to scroll
in
CD-TEXT,
MP3IWMA
TITLE.
* The factory default setting
is
"ON".
1.
Press and hold the
[0]
button for 1 second or
longer to switch to the adjust mode.
2. Press the [
..........
]
or
[~]
button to select
"AUTO
SCRl".
3.
Turn the
[ROTARY]
knob and select
"SCROLL
ON" or
"SCROLL
OFF".
.SCROLL
ON:
Scroll automatically.
•
SCROLL
OFF:
Scroll just 1 time when the title was changed
or the [TITLE] button was pressed.
4.
Press the
[0]
button to return to the previous
mode.
24
DFZ675MC