Owner`s manual
Adjust
Mode
I
Common
Operations
Setting
for
scroll
speed
You can adjust scroll speed between
SPEED
1
(maximum) and
SPEED
6 (minimum).
'"
The factory default setting
is
"SPEED
2".
1.
Press and hold the
[0]
button for 1second or
longer to switch to the adjust mode.
2.
Press the
[I
.......] or [...
~]
button to select
"SCRl
SPEED".
3.
Turn the
[ROTARY]
knob and select scroll
speed.
4. Press the [0] button to return to the previous
mode.
Dimmer
control
You can setting the
dimmer
control ON or OFF.
The factory default setting
is
"ON".
1.
Press and hold the
[0]
button for 1 second or
longer to switch to the adjust mode.
2.
Press the
[I
........
] or [
........
] button to select
"DIMMER".
3.
Turn the
[ROTARY]
knob and select
"DIMMER ON" or "DIMMER OFF".
4.
Press the
[0]
button to return to the previous
mode.
Adjusting
the
display
contrast
You can adjust the display contrast to match the
angle of installation of the unit.
'"
The factory default setting
is
"5".
(Adjustment range: 1 to 16)
1.
Press and hold the
[0]
button for 1 second or
longer to switch to the adjust mode.
2.
Press the [
.........
] or [
........
] button to select
"CONTRAST"
.
3.
Turn the
[ROTARY]
knob to adjust the
contrast.
4.
Press the
[0]
button to return to the previous
mode.
Remaining
capacity
of
the
memory
The
remaining capacity of the flash memory
~an
be displayed
as
an approximate recordable time
in
"MM : SS"
(minute:
second).
1.
Press the [A] button to switch to the adjust
mode.
2.
Press the
[I
.......
] or [.......
I}
button to select "MC
AVll
[3".
3.
Press the
~II}
button.
4.
Press the [A] button to return to the previous
mode.
Setting
a
recording
mode
The recording mode for MUSIC
CATCHER
II
can
be switched between the following 4 modes:
• "SHO" :about 248 minutes
• "HQ" :about
331
minutes
• "STD" :about 497 minutes
•
"lP"
:about 663 minutes
* The factory default setting
is
"STD".
1. Press the [A} button to switch to the adjust
mode.
2. Press the
[I
........
] or [
........
] button to select "MC-
REe".
3. Turn the [ROTARY] knob and select "SHO",
"HO", "STO"
or
"lP".
4. Press the [A] button
to
return to the previous
mode.
Anti-theft
indicator
When the ignition key is turned to Off, Red Anti-
theft indicator blinks to prevent theft by its
luminous effect.
* The factory default setting
is
"OFF".
1.
Press the [A] button to switch to the adjust
mode.
2.
Press the
[I
........
]
or
[........] button to select
"BLINK
lED".
3.
Turn the
[ROTARY]
knob and select
"lED
ON"
or
"LED
OFF".
4.
Press the [A] button to return to the previous
mode.
DFZ675MC
25