Owner`s manual

CD Changer Operatio.ns
CD changer functions
When an optional CD changer is connected
through the
CeNET cable, this unit controls all
CO changer functions. This unit can control a
total of 2 changers.
1. Press the [SRC] button and select the CD
changer mode to start play.
* If 2 CD changers are connected, press the
[SRC] button
to select the CD changer for play.
'" If "NO MAG" appears in the display, insert the
magazine into the
CD changer. "DISC
CHECK" appears
in the display while the
player loads (checks) the magazine.
* If "NO DISC" appears in the display, eject the
magazine
and insert discs into each slot. Then,
reinsert the magazine back into the
CD
changer.
Notes:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
ACAUTION
CD-ROM discs cannot be played from every
CD changer, it's depended on the model.
Pausing play
1. Press the [-..] button to pause play. "PAUSE"
appears in the display.
2. To resume play, press the [~.u button again.
Selecting a track
.Track-up
1. Press the [.......] button to move ahead to the
beginning
of the next track.
2. Each time you press the [
.... ] button, the
track advances ahead to the beginning of the
next track.
.Track-down
1. Press the [ ...... ] button to move back to the
beginning of the current track.
2. Press the [ ...... ] button twice to move to the
beginning
of the previous track.
Fast-forward/fast-rewind
• Fast-forward
1. Press and hold the [.......] button for 1 second
or longer.
• Fast-rewind
1. Press and hold the [~] button for 1 second
or longer.
Selecting a CD
1. Press the [UP] or [DOWN] button to select the
desired disc.
* If a CD is not loaded in a slot of magazine,
pressing the
[UPJ or [DOWN] button can not
work.
1. Press the [BND] button to move the next disk
in increasing order.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is cancelled.
1. Press the [SCN] button to start track
scanning.
* Scan play starts from the next track after the
track currently being played back.
2. To cancel the scan play, press the [SCN]
button again.
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc
in the
currently selected
CD changer. This function
continues automatically until it is cancelled.
1. Press and hold the [SCN] button for 1 second
or longer.
'" Disc scan play starts from the next track after
the track currently being played back.
2. To cancel disc scan play, press the [SCN]
button again.
Repeat play
Repeat play continuously plays the current track.
This function continues automatically until it is
cancelled.
1. Press the [RPT] button.
2. To cancel repeat play, press the [RPT] button
again.
DFZ675MC 27