User Guide

12 DPH7500z
come loose and disconnect.
3. Digital Optical Fiber Cable
When you connect the digital optical fiber
cable to the digital input terminal or to the digi-
tal output terminal, firmly insert it until it is
locked in position.
Connect the black slid cap side to the digital
input terminal of the DPH 7500z.
Note:
Do not bend the digital optical fiber cable through
a loop smaller than 1˝ (3cm) in radius. Doing so
will greatly reduce perfomance.
9
Digital optical fiber cable
(Black slide cap side)
After connecting, fasten the cable using the
included cable clip 9. One cable clip can fix
up to 2 digital optical fiber cables.
To remove the digital optical fiber cable, pull it
by lightly grasping the slide cap C of the cable
in your fingers.
C
How to make wirings
4. Ground lead
Tighten the small terminal of the ground lead
E together with the mounting bracket 5, and
connect the large terminal to the metal part
of the car body using the car screw D.
If grounding is not achieved, noise results.
8
5
D
E