Owner’s manual Mode d’emploi Manual de instrucciones DRX7675z AM/FM CD PLAYER WITH CD/MD CHANGER CONTROL • COMBINÉ RADIO/CD AM/FM AVEC PILOTE DE CHANGEUR CD/MD • RADIO DE AM/FM Y REPRODUCTOR DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DISCOS COMPACTOS/MINIDISCOS Clarion Co., Ltd. 1999/8 (D·C) All Rights Reserved. Copyright © 1999: Clarion Co., Ltd.
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, MD changer and TV tuner connected via the CeNET cable.
Handling Compact Discs 2. PRECAUTIONS 1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2.
3. CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Removing the DCP Attaching the DCP 1. Hold down POWER button 3 for 1 second or longer to turn off the power. 1. Insert the right side of the DCP into the source unit. 2. Insert the left side of the DCP into the source unit. 2. 2.
. REMOTE CONTROL Receiver for remote control unit OPEN DRX7675z ISR 1 2 3 4 5 6 Operating range: 30° in all directions Signal transmitter Remote control unit Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (UM-3/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover. AA (UM-3/1.
Functions of Remote Control Unit Buttons Button Mode Radio CD CD changer MD changer TV , FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, CD, CD changer, MD changer and TV. - BAND DISC UP PROG TOP Switches reception band. . VOLUME Increases and decreases volume (in all modes). / SEARCH Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward. : PLAY/PAUSE No function.
7. OPERATIONS Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations ∗ When you have entered a title in a CD, it appears in the sub display. If you have not entered a title, “NO-TTL” appears in the title display instead. For information on how to enter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”. Setting the Z-enhancer This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer. ∗ The factory default setting is “Z-EHCR OFF”.
Basic Operations Radio Operations Adjusting the Z-enhancer FM reception 1. Press Z-EHCR button 8 and select the Zenhancer mode (1 to 3) to adjust. 2. Press A-M button $ and select “Z-EHCR”. 3. Turning the Rotary knob & clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction. ® For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Radio Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press BND button # and select the desired band (FM or AM). Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
CD Operations Loading a CD Ejecting a CD 1. Press OPEN button 1 to access the CD insertion slot behind the FLIP DOWN PANEL. 2. Insert a CD into the center of the insertion slot with the label side facing up. The CD plays automatically after loading. Notes: • Never insert foreign objects into the CD insertion slot. • If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. 1. Press OPEN button 1 to open the FLIP DOWN PANEL. 2.
CD Operations Other Handy Functions Fast-forward/fast-backward Setting the clock ● Fast-forward Press and hold the right side of SEARCH button % for 1 second or longer. ● Fast-backward Press and hold the left side of SEARCH button % for 1 second or longer. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. 2. Press the right or left side of SEARCH button % to select “CLOCK”. 3. Press ENT button 2. 4.
Other Handy Functions Entering titles Titles up to 10 characters long can be stored in memory and displayed for radio stations and CDs. The numbers of titles that can be entered for each mode are as follows. 4. Press BND button #. 5. Press and hold ENT button 2 for 2 seconds or longer to clear the title and cancel the title input mode.
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Selecting a CD When an optional CD changer is connected through the CeNET cable, this unit controls all the CD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FNC button 3 and select the CD changer mode to star t play. If 2 CD changers are connected, press FNC button 3 to select the CD changer for play. Each of the Direct button 9 corresponds to a disc loaded into the magazine.
CD Changer Operations Top function Disc repeat play The top function plays from the first track (track No. 1) of the disc. ● When playing a disc 1 to 6 Press the Direct button 9 (1 to 6) with the same number as the CD playing. ● When playing a disc 7 to 12 (only when a 12 disc CD changer is used.) Press and hold for 1 second or longer the Direct button 9 (7 to 12) with the same number as the CD playing.
MD Changer Operations MD changer functions When an optional MD changer is connected through the CeNET cable, this unit controls all the MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press FNC button 3 and select the MD changer mode to star t play. If 2 MD changers are connected, press FNC button 3 to select the MD changer for play. ∗ If “NO DISC” appears in the display, load MDs into the MD changer. 2.
MD Changer Operations TV Operations Repeat play TV tuner functions The repeat play continuously plays the current track. This function continues automatically until it is canceled. 1. Press RPT button 6. “RPT” lights in the display and the current track is repeated. 2. To cancel the repeat play, press RPT button 6 again. “RPT” goes off from the display and normal play resumes. When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions.
TV Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Press BND button # and select the desired band (TV1 or TV2). Auto store selects 6 TV stations automatically and stores each one into a preset memory.
9. TROUBLESHOOTING General Problem Cause Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. MD changer CD changer CD Error Display Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped disc.
11. SPECIFICATIONS FM Tuner Audio Frequency Range: 87.9 MHz to 107.