User Guide

ManualsBrandsClarion ManualsOtherDVH920

280-7805-00

5 DVH920 6 DVH920 DVH920 7

CONTROLS/LES COMMANDES/CONTROLES/

5. NOMENCLATURE

Names of Buttons

Center Unit

[EQ] button:

• Press to enter the EQ mode.

• When the button is pressed and hold for 1 sec-

ond or longer, the mode is turned on or off.

[ENT] button:

• Used as “Enter button” while the unit is in the

adjust mode.

[ADJ] button:

• Press and hold the button for 1 second or longer

to enter the adjust mode.

[a], [d] buttons:

• Used for selecting the respective adjustment

items.

[ROTARY] knob:

• Use the knob to perform various settings.

[DIRECT] button:

• Used for D.S.F. menu selection.

[VSE] button:

• Press the button to turn on the DSF.

• After DSF is selected, press and hold the [VSE]

button for 1 second or longer to turn to off DSF

effect.

[PLII] button:

• Press the button to turn on the PLII. Each time

the button is pressed, PLII mode changes fol-

lowing order:

MUSIC mode ➜ MATRIX mode ➜ MOVIE

mode ➜ VIRTUAL mode ➜ mode off

Center Unit Display

6. CONFIRM BEFORE OPERATION

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

■

Center unit / Unité centrale / Unidad central /

[

VSE

]

[

]

[

ENT

]

[

ADJ

]

[

PLII

]

[

DIRECT

]

[

ROTARY

]

DXZ925

: MUSIC mode

: MATRIX mode

: MOVIE mode

: VIRTUAL mode

: DOLBY DIGITAL indicator

Lights when playing Dolby Digital sound from the Digital input con-

nector.

: LINEAR PCM indicator

Lights when playing linear PCM sound from the Digital input con-

nector.

: DTS indicator

Lights when playing DTS sound from the Digital input connector.

: DOLBY PLII (Dolby Pro Logic II) indicator

Lights when selecting the various Dolby Pro Logic II function modes.

: D.S.F. indication

(DCZ625)

(VCZ625)

(DVH920)

(VRX925VD)

DCA-005 (5m)

DCA-008 (1.5m)

DCA-006 (5m)

■

DOLBY PL

indicators

This component does not operate independently as an stand-alone unit and must be used in conjunc-

tion with an operational Clarion Center Unit (CeNET supported), or a 5.1 CH surround decoder control

unit (DVC920).

See section “10. SYSTEM EXPANSION” (P. 16) for details regarding other compatible components.

■

CeNET Cable

The CeNET cable used must not be over 20 m long (including the length of the CeNET branch cable

CCA-519). When making connections be sure that your cable length is not over 20 m.

■

Optical Digital Cables (sold separately or furnished with DVH920)

Optical digital cables (sold separately or furnished with DVH920) connected to this unit differ depend-

ing on the model of CeNET component involved.

Consult your dealer regarding the kind of optical digital cable required for your component.

Likewise, consult the operating instructions accompanying your component for details regarding con-

nections.

Ce-NET connections

DVD/wide 7” AV center unit

CeNET DVD changer

(Gray)

5.1ch surround

decoder

CeNET CD changer

(Gray)

(Black)

Note:

• When the DVH920 is connected, the P.E.Q., PO-

SITION, VSE, BAS/TRE, and TITLE inputs used

with the DXZ925 can no longer be used.

280-7805-00_02-08 (En) 2/21/02, 4:12 PM4