Owner’s manual !" 사용 설명서 DXZ746MP AM / FM CD / MP3 / WMA PLAYER • ^jLcj=`aLjmPLtj^= • AM/FM CD/MP3/WMA 플레이어 Clarion Co., Ltd. 2004/1 +DXZ746MP-001-cover_ip All Rights Reserved. Copyright © 2004: Clarion Co., Ltd. Page 1 PE-2619K 280-8046-00 03.12.26, 5:15 PM Adobe PageMaker 6.
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer and TV tuner, BB. DTS/AC3 connected via the CeNET cable.
Display Items Preset channel indication (1 to 6) Disc number indication (1 to 12) : 2-ZONE indication CAUTION : Main indication : Sub indication : Anti Distortion Filter indication : MP3 indication : WMA indication : DTS indication : Stereo indication : DSF indication : Folder indication : P.
Source unit / 主机 / 본체 Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). ● When the CD/DVD changer is connected ∗ For details, see the section “CD Changer Operations”. For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. Names of the Buttons and Their Functions [ROTARY] [Q] [RELEASE] [RELEASE] button [PLAY LIST] button • Deeply push in the button to unlock the DCP.
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Attaching the DCP 1. Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit. English 5. DCP Removing the DCP 1. With the MOTORIZED FACE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [RELEASE] button 2.
English 6. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [FUNC] [ ],[ [2-ZONE] ] [ ],[ ] [BAND] [ISR] [MUTE] [DISP] [SCN] [RDM] [RPT] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.
Mode Radio CD changer DVD changer CD/MP3/WMA Button TV [FUNC] Switches among radio, CD/MP3/WMA, CD changer, DVD changer, TV and AUX. [BAND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward. Moves preset channels up and down.
English 7. OPERATIONS Basic Operations Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations Adjusting the tone Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes in the following order: ● When the ADF-1 (ADF-2, ADF-3) is set “SUB-W VOL” ➜ “BALANCE” ➜ “FADER” ➜ Last function mode... ● When the ADF-OFF is set “SUB-W VOL” ➜ “BASSÅGAINΔ ➜ “TREBÅGAINΔ ➜ “BALANCE” ➜ “FADER” ➜ Last function mode… ∗ If subwoofer function is set “ON”, “SUB-W VOL” can be selected.
Radio Operations Basic Operations English speakers. Listening to the radio ∗ The factory default setting is “0”. (Adjustment range: F12 to R12) 1. Press the [FNC] button and select the radio mode. The frequency in the display. 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... 3. Press the [a] or [d] button to tune in the desired station. 3.
Radio Operations Preset scan A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station. Preset scan receives the stations stored in preset memory in order.
CD/MP3/WMA Operations English MP3/WMA What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
CD/MP3/WMA Operations Setting Set to CD Set to MP3/WMA Mixed with CD and Play CD Play MP3/WMA MP3/WMA type tracks CD type track only Play CD Play CD MP3/WMA type track only Play MP3/WMA Play MP3/WMA 2. After making these settings, remove the disc and then reinsert it. 3. When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard. Note: • When playing a CCCD (Copy Control CD), set the setting to CD type.
CD/MP3/WMA Operations English Loading 8 cm compact discs Selecting a track ∗ No adapter is required to play an 8 cm CD. ∗ Insert the 8 cm CD into the center of the insertion slot. ●Track-up 1. Press the [d] button to move ahead to the beginning of the next track. 2. Each time you press the [d] button, the track advances ahead to the beginning of the next track. ●Track-down 1. Press the [a] button to move back to the beginning of the current track. 2.
CD/MP3/WMA Operations 2. To select a track, press the [a] or [d] button. Top function The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc. ∗ In case of MP3/WMA, the first track of a folder being played will be returned. Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. 1. Press the [SCN] button to perform scan play.
CD/MP3/WMA Operations English Folder random play This function allows you to play all the tracks of all the folders recorded on an MP3/WMA disc in a random order. 1. Press and hold the [RDM] button for 1 second or longer to perform folder random play. The indications “FOLDER” and “RDM” light up in the display and “ -RANDOM” appear in the title display for about 2 seconds, and then folder random play starts. 2. To cancel folder random play, press the [RDM] button again.
Different pieces of music heard by plural listeners (2-ZONE function) The 2-ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit, thereby allowing plural listeners to enjoy separate music sources. This unit can control its internal sources (radio, CD, MP3, etc.) to play back them, and further, can simultaneously play back sources from external equipment connected via CeNET (for instance, CD changers etc.).
Operations Common to Each Mode English Turning the screen saver function on or off This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display in a random order. You can turn on and off this function.
Operations Common to Each Mode English Dimmer level Setting the Subwoofer You can adjust the reduced illumination level of the dimmer. You can set the subwoofer on or off. ∗ The factory default setting is “LV3”. (Adjustment range is LV1 to LV5) 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button and select “Å SUB-W Δ. 3. Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”. 4.
Operations Common to Each Mode English AUX function This system has an external input jack so you can listen to sounds and music from external devices connected to this unit. Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. ∗ The factory default setting is “MID”. 1.
Operations Common to Each Mode Clearing titles Titles up to 10 characters long can be stored in memory and displayed for Radio, CD, CD changer, tuner station and TV stations. The number of titles that can be entered for each mode are as follows. 1. Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title. 2. Press the [D] button and display the main. 3. Press the [T] button. The display switches to the title input display. 4. Press the [BND] button.
English 8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [FNC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [FNC] button to select the CD changer for play. ∗ If “NO MAGAZINE” appears in the display, insert the magazine into the CD changer.
CD Changer Operations Disc repeat play ●Fast-forward Press and hold the [d] button for 1 second or longer. ●Fast-backward Press and hold the [a] button for 1 second or longer. After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. 1. Press and hold the [RPT] button for 1 second or longer. “DISC” and “RPT” light in the display and disc repeat play starts. 2.
TV Operations English TV tuner functions Manual tuning When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (TV1 or TV2). Watching a TV 1.
TV Operations Auto store Setting the TV diver Auto store selects 6 TV stations automatically and stores each one into preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. 1. Press the [BND] button and select the desired TV band (TV1 or TV2). 2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
Connect with 5.1ch Surround Decoder (DVH920/DVH940) English ■ DVH920 SET and 5.1ch Surround Decoder connect wth RCA pin cable BB TV Tuner (TTX7501z /TTX7502z /TTX7504z) TV MONITOR CeNET DVD Changer (VCZ625) Gray 1-DIN Center Unit (DXZ746MP) NOFADER CeNET Cable (furnished with component to be connected) ∗ Refer to the OWNER’S MANUAL of DVH920. wired controller (DVC920) Connect to 4ch power amplifier 5.
Connect with 5.1ch Surround Decoder (DVH920/DVH940) English ■ DVH940 SET and 5.1ch Surround Decoder connect wth RCA pin cable BB TV Tuner (TTX7501z /TTX7502z / TTX7504z) TV MONITOR CeNET DVD Changer (VCZ625) Gray 1-DIN Center Unit (DXZ746MP) NOFADER CeNET Cable (furnished with component to be connected) ∗ Refer to the OWNER’S MANUAL of DVH940. Connect to 4ch power amplifier 5.
Problem General English 9. IN CASE OF DIFFICULTY Cause Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
Cause Measure Water droplets may form on the internal lens when the car is parked in a humid place. Let dry for about 1 hour with the power on. Wrong filename File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Play list play is not performed. File name or extension is not correct. Use alphanumeric/ASCII characters for MP3/WMA file name. Use “.M3U” for the file extension of a play list. DXZ746MP +DXZ746MP-009-ENG Page 33 03.12.
English 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A CD is loaded upside-down inside the CD deck and does not play.
FM Tuner Audio Frequency Range: 87.0 MHz to 108.0 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Maximum Power Output: 212 W (53 W ✕ 4 ch) Continuous Average Power Output: 18 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD Bass Control Action (50 Hz/80 Hz/120 Hz): +16 dB, –12 dB Treble Control Action (8 kHz/12 kHz): ±12 dB Line Output Level (CD 1 kHz): 4V English 11.
36 DXZ746MP +DXZ746MP-009-ENG Page 36 03.12.26, 5:18 PM 280-8046-00 Adobe PageMaker 6.