Owner’s manual Mode d’emploi Manual de instrucciones DXZ545MP AM/FM CD/MP3/WMA PLAYER • RADIO AM/FM-LECTEUR CD/MP3/WMA • REPRODUCTOR DE AM/FM CD/MP3/WMA
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, TV tuner connected via the CeNET cable.
1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.
Handling Compact Discs or Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode may not be usable. Handling • Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. • New discs may have some roughness around the edges.
English 3.CONTROLS / LES COMMANDES / CONTROLES Source unit / Appareil pilote / Unidad fuente Français Español [ROTARY] [CD SLOT] [RELEASE] [Q] [ [ISR] [DISP] [a], [d] [ ] [SCN] [RPT] [RDM] [PLAY LIST] [DIRECT] [DN], [UP] Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
English 4. NOMENCLATURE Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Names of the Buttons and their Functions [RELEASE] button [PLAY LIST] button • Deeply push in [RELEASE] button to unlock DCP. • Press and hold for 1 second or longer to turn on or off the play list mode. (MP3/WMA disc only) [ROTARY] knob • Adjust the volume by turning the knob clockwise or counterclockwise. • Use the knob to perform various settings.
● When the CD/DVD changer is connected ∗ For details, see the section “CD changer operations”. For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. [DISP] button • When the button is pressed and held, switches the user titles or track titles, etc. while in the CD changer mode. [T] button • Use the button to input a title in the CD changer mode. • Use the button to scroll the title during CD-text play.
Display Items English : Satellite indication : Disc folder indication : Scan indication : Repeat indication : Random indication Operation status indication Titles, clock, etc. are displays. Z-Enhancer Plus indication : Mute indication : Preset channel indication (1 to 6) Disc number indication (1 to 12) Function mode indication The names of modes being selected, etc. are displayed.
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Storing the DCP in the DCP Case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.) DCP Removing the DCP 1. Press the [FNC] button for 1 second or longer to switch off the power. 2.
English 6. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [FUNC] [ ],[ [2-ZONE] [ ] ] [ ],[ ] [BAND] [ISR] [MUTE] [DISP] [SCN] [RDM] [RPT] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.
Mode Radio/SIRIUS CD changer DVD changer CD/MP3/WMA Button TV [FUNC] Switches among radio, SIRIUS tuner, CD/MP3/WMA, CD changer, DVD changer, TV and AUX. [BAND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward.
English 7. OPERATIONS Basic Operations Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations ∗ When Z-Enhancer Plus is selected, press and hold the [Z+] button for 1 second or longer to change to the “CUSTOM” mode. Bass/treble characteristics become flat and the indication “Z+ FLAT” is shown in the display. Adjusting the tone Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order: ●When “BASS BOOST” is set “SW-VOL 0” ➜ “B-BOOST 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.
English Basic Operations Radio Operations Adjusting the balance FM reception 1. Press the [A-M] button and select “BAL 0”. 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. ® For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. ∗ The factory default setting is “BAL 0”.
Radio Operations Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station. ∗ Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
CD/MP3/WMA Operations English MP3/WMA What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 10 percent of its initial size with a high sound quality. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
CD/MP3/WMA Operations Setting Set to CD Set to MP3/WMA Mixed with CD and Play CD Play MP3/WMA MP3/WMA type tracks CD type track only Play CD Play CD MP3/WMA type track only Play MP3/WMA Play MP3/WMA 2. After making these settings, remove the disc and then reinsert it. 3. When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard. Note: • When playing a CCCD (Copy Control CD), set the setting to CD type.
CD/MP3/WMA Operations English ●CD-TEXT disc User title (disc) ➜ CD-text title (disc) ➜ Artist name ➜ CD-text title (track) ➜ User title (disc)... ●MP3/WMA disc Folder ➜ File ➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜ Folder... Notes: • If the CD playing is not a CD-text CD or no user title has been input, “NO TITLE” appears in the display. • If MP3/WMA disc is not input TAG, “NO TAG” appears in the display. • For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. • Tag displays give priority to V2.3 / 2.
CD/MP3/WMA Operations Random play 2. To cancel folder scan play, press the [SCN] button again. The play status indications such as “FOLDER” and “SCN” disappear from the display and the current track is played. This function allows you to play all tracks recorded on a disc in a random order. 1. Press the [RDM] button to perform random play.
CD/MP3/WMA Operations English Press the [UP] button to move to the next play list. Notes: • The SCN/RPT/RDM functions cannot be used while in the play list mode. • The title display changes from folder name to play list name. Making a play list 1. Write desired tracks to a CD-R/RW, etc. Be sure to use alphanumeric/ASCII characters for all file names. 2. Make a play list by using a multimedia player, etc. and save the data. The file format must be M3U or ASX. 3.
Different pieces of music heard by 2. Press the [FNC] button to select a source in the control zone. Every time the button is pressed, the followings appear in turn. ●For a source group included in this unit: Radio ➜ CD/MP3 ➜ AUX ➜ Radio... ●For a source group in external equipment: AUX ➜ CD changer ➜ DVD changer ➜ TV ➜ AUX... ∗ The name of equipment that is not connected to this unit is not displayed. • To change a current musical performance etc.
Operations Common to Each Mode English 7. Turn the [ROTARY] knob to select the desired character. 8. Repeat step 5 to 7 to enter up to 30 characters for message. ] button for 2 sec9. Press and hold the [ onds or longer to store the message in memory and cancel input message. 10.Press the [T] button to return to the previous mode. 2. Press the [a] or [d] button to select “DIMMER”. 3. Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”. 4.
Operations Common to Each Mode Setting the clock 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “CLOCK ”. 3. Press the [ ] button. 4. Press the [a] or [d] button to select the hour or the minute. 5. Turn the [ROTARY] knob clockwise or counterclockwise to set the correct time. 3. Press the [DISP] button and display the main. 4. Press the [T] button. 5. Press the [a] or [d] button to move the cursor. 6.
English 8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers. Press the [FNC] button and select the CD changer mode to start play. If 2 CD changers are connected, press the [FNC] button to select the CD changer for play. ∗ If “NO MAG” appears in the display, insert the magazine into the CD changer.
CD Changer Operations Random play Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. “RDM” lights in the display and random play begins. 2. To cancel random play, press the [RDM] button again. “RDM” goes off from the display and normal play resumes. ∗ The scan play is useful when you want to select a desired track. 1. Press the [SCN] button to start track scanning.
TV Operations English TV tuner functions When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner and monitor. Watching a TV 1. Press the [FNC] button and select the TV mode. 2. Press the [BND] button to select the desired TV band (TV1 or TV2). Each time the button is pressed, the input selection toggles between TV1 and TV2. 3. Press the [a] or [d] button to tune in the desired TV station.
TV Operations English Preset scan Preset scan allows the user to view each preset position before it automatically advances to the next preset. This function is useful for searching for a desired TV station in memory. 1. Press the [P/A] button. 2. When the desired station is found, press the [P/A] button again to remain tuned to that station. Note: • Do not press and hold the [P/A] button for 2 seconds or longer. Doing so will trigger the auto store function and start storing stations into memory.
General Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2.
English 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. General DVD changer CD changer CD/MP3/WMA Error Display Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc.
English 11. SPECIFICATIONS FM Tuner Audio Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Maximum Power Output: 208 W (52 W ✕ 4 ch) Continuous Average Power Output: 17 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD Bass Control Action (50 Hz/80 Hz/120 Hz): +16 dB, -12dB Treble Control Action (8 kHz/12 kHz): ±12 dB Line Output Level (CD 1 kHz): 1.
Clarion Co., Ltd. 2003/12 All Rights Reserved. Copyright © 2003: Clarion Co., Ltd.
2002/12 (A'D) Printed in China / Imprime en Chine / Gedruckl in China / Stampala in Cina / Gedrukl in China / Impresa en China ITryckt i Kina / Impressa na China <285-1919-00> MP3/WMA Operations / Fonctionnement des MP3/WMA MP3/WMA-Betrieb / Operazioni MP3/WMA clarion Before using any MP3/WMA discs, please read the following supplemental instructions in conjunction with your Owner's Manual. Avant d'utiliser des disques MP3/WMA, veuillez lire les explications en plus de celles de votre Mode d'emploi.
Printed in China 1 imprime en Chine Ilmpreso en China 284·9882·00 2003/11 ......;...-----------......:;.;;,;;.;;.;.~-----=:::..:..=::..::.:=---------------------------------, clarion InstaliationlWire Connection Guide Manuel d'installation et de connexion Guia de instalaci6n/conexion de cables GIrD . . . . . . . -1. BEFORE STARTING I PREPARATIFS I ANTES DE COMENZAR 1. This set is exclusively for use in cars with a negative ground, 12 V power supply. 2. Read these instructions carefully. 3.
• PRECAUCION • PRECAUTION Remove the stopper following the procedures below when this source unit is installed without the universal mounting bracket. • 'Precaution Retire el tapon despues de los siguientes procedimientos indicados abajo cuando esta unidad de la fuente esta instalada sin el soporte de montaje universal. Retirer la languette en procedant comme suit pour installer Ie module source sans la patte de montage universel. 1. Remove the screw from the source unit (Figure 5).
GIID _ _ . . . -6. WIRE CONNECTIONS I CONNECTIQUE I CONEXION DE CABLES ... •• ... ...• ® ® .DXZ945MP/DXZ745MP ___~~1 I Antenna Antenne Antena ~ ~~® , ® ® ® @ To external amplifier To eliminate audio short circuits, do not remove the caps of unused RCA cables. CAUTION: Please make sure when connecting external power amplifier, that you properly, to the car chassis, ground the amplifier. If this is not done, severe damage to the source unit may happen.
---7. SYSTEM EXAMPLElEXEMPLE DE SYSTEME/EJEMPLO DESISTEMA • Example of the system using an external amplifier (Audio Visual) • Exemple de systeme utilisant un amplificateur exterieur. (audio·visuel) • Ejemplo de sistema utilizando un amplificador externo (audiovisual) • DXZ845MC/DXZ645MP/DXZ545MP/DXZ445 • DXZ945MP/DXZ745MP ~6:=:: ~ r--1;lr;;=:1:;::::::::q1;l'-----12 o L.:.J L.:.J -_. '., ~ CD ... _-' ____® _10 ;~_ " , Amp', Amp' " , "" ' " ,,' " "" ,' ® --1--' .
281-0624-00 2003/8 clarion CLARION LIMITED WARRANTY For USA and Canada only If purchased from an authorized Clarion dealer, this product is warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase. Clarion ProAudio products, except for speakers, are covered by a two (2) year limited warranty when purchased from and installed by an authorized Clarion dealer.
100 CHANNELS OF THE BEST ENTERTAINMENT ON THE ROAD Clarion siriusradio.
SIn.IU-S--~----- P 1 2 3 4 5 7 8 9 15 17 20 21 22 23 24 25 26 27 29 ClIP I"~ Top 40 Hits Adult Contemporary Alt Pop Mix Love Songs The Best of the 50s/60s The Best of the 70s The Best of the 80s The Best of the 90s 50ft Rock Eclectic Rock Rock Hits Modern Rock Mainstream Rock Classic Rock I Classic Rock II Classic Alternative Alternative I Alternative II Hard Rock ) 2002 Sirius Satellite Radio Inc.
GET READY FOR 100 CHANNELS OF THE BEST IN-CAR ENTERTAINMENT. You've just purchased a Sirius Satellite Radio receiver that's going to plug you into 60 original music channels, from today's hits to R&B oldies to classical masterpieces. From authentic country and real bluegrass to cool jazz, hot latin, reggae and rock. Plus 40 channels of world-class sports, news and entertainment, like ESPN, Radio Disney, E! Entertainment Radio, CNBC, Fox News and Discovery Radio. EXPERIENCE SIRIUS IN TWO SIMPLE STEPS.