CD/USB/MP3/WMA/AAC Receiver Owner's Manual

Operations Common to Each Mode
English
25
DXZ578RUSB
● Setting the dimmer control
You can set the dimmer control “ HIGH ”, “ MID ”,
“ LOW ” or “ OFF ”.
∗ The factory default setting is “ MID ”.
2-1. Select “ DIMMER ”.
3-1. Press the [ UP ] or [ DN ] button to select
“ HIGH ”, “ MID ”, “ LOW ” or “ OFF ”.
● Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗ The factory default setting is “ OFF ”.
2-1. Select “ BLINKLED ”.
3-1. Press the [ UP ] or [ DN ] button to select
“ ON ” or “ OFF ”.
● Setting the external amplifier
∗ The factory default setting is “ OFF ”.
2-1. Select “ A CANCEL ”.
3-1. Press the [ UP ] or [ DN ] button to select
“ ON ” or “ OFF ”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
● Set the cellular phone connection
mode (AUX/TEL)
You can listen to your telephone calls from the
speakers connected to this unit.
∗ The factory default setting is “ AUX ”.
2-1. Select “ AUX/TEL ”.
3-1. Press the [ UP ] or [ DN ] button to select
“ AUX ” or “ TEL ”.
• AUX:
When you select “ AUX”, the AUX input
cable is used to connect a AUX
BLUETOOTH BB (BLT373) (sold
separately).
• TEL:
When you select “TEL”, the CENET input
cable is used to connect a cellular phone
(BLT433 or TEL-002) (sold separately).
● Setting the car speaker output for the
cellular phone
∗ The factory default setting is “R”.
∗ To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select “TEL SP”.
3-1. Press the [UP] or [DN] button to select “R”
or “L”.
•R:
Telephone calls can be heard on the front
right speaker connected to this unit.
•L:
Telephone calls can be heard on the front
left speaker connected to this unit.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “TEL SW”.
3-1. Press the [UP] or [DN] button to select the
setting in the following order:
“OFF” ↔ “ON” ↔ “MUTE”
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
pressing the [UP] or [DN] button.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● Performing a system check
2-1. Select “SYSTEM CHECK”.
3-1. Press and hold the [ ] button for 1
second or longer.
“SYSTEM CHECK” appears in the display,
then the unit returns to the previous
operation mode.
DXZ578RUSB_EN.book 25 ページ ２００６年１２月２６日 火曜日 午後２時４９分