Owner’s manual Mode d’emploi Manual de instrucciones DXZ945MP AM/FM CD/MP3/WMA PLAYER BUILT-IN DSP/EQ WITH TOUCHPANEL • RDS EON HAUT DE GAMME COMBINAISON FM/MW/LW RADIO CD/MP3/WMA AVEC ECRAN TACTILE • AVANZADA COMBINACIÓN DE RADIO RDS-EON FM/MW/ LW Y REPRODUCTOR DE CD/MP3/WMA CON PANEL TACTIL Clarion Co., Ltd. 2003/12 (Abe·Abe) All Rights Reserved. Copyright © 2003: Clarion Co., Ltd.
English Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable.
1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about 1 hour. The condensation will disappear naturally allowing normal operation. 2.
Sloping Console English This unit uses a SLOPING CONSOLE to make large screen displays possible. When you use the SLOPING CONSOLE, be sure to close it. CAUTION BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE. 1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key. If you switch OFF the ignition key with the SLOPING CONSOLE tilted, the SLOPING CONSOLE does not close. 2.
English 3.
English 4. NOMENCLATURE Names of the Buttons and their Functions [RELEASE] button [I] button • Remove the DCP. • Immediately calls up a favorite radio station regardless of the current mode. (This is the ISR function.) You can store radio stations to the [I] button by holding this button down for 2 seconds or longer in the radio mode (when the 2-ZONE function is “OFF”). Switches the operation of the 2-ZONE function.
● When the CD/DVD changer is connected ∗ For details, see the section “CD changer operations” (cf. page 45). For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. [ ] button • Play or pause a CD or DVD. [A] button • Used for entering disc titles in the CD changer mode. ● When the TV is connected ∗ For details, see the section “TV operations” (cf. page 48). [ ] button • Switch the TV picture mode or VTR (external) picture mode.
Display Items English : Manual indication : Dolby PLII indication : Stereo indication : Mute indication : DRM (Digital Rights Manegement) indication : ADF (Anti Distortion Filter) indication ADF Dolby PL II USER MODE FM1 98.1MHz MANU 4 INT. 3 2B BAND : 2-ZONE indication Display Operations A touch panel display is used as the display on this unit. You can operate this display just by touching it with your fingertip.
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Attaching the DCP 1. Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit. Removing the DCP 1. With the SLOPING CONSOLE closed, turn off the power. 2. Press the [RELEASE] button deeply to open the DCP. [RELEASE] button 2.
English 6. REMOTE CONTROL Receiver for remote control unit Operationg range : 30° in all directions Signal transmitter Remote control unit [FUNC] [ ],[ [2-ZONE] ] [ ],[ ] [BAND] [ISR] [MUTE] [DISP] [SCN] [RDM] [RPT] Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (SUM-3, R-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.
Functions of Remote Control Unit Buttons Radio/SIRIUS CD changer/ DVD changer CD/MP3 Button TV [FUNC] Switches among radio, SIRIUS tuner, CD/MP3, CD changer, DVD changer, TV and AUX. [BAND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Moves preset channels up and down. Moves tracks up and down.
English 7. OPERATIONS Basic Operations CAUTION Be sure to lower the volume before switching the unit off or the ignition key. The unit remembers its last volume setting. If you switch the power OFF with the volume up, when you switch the power back ON, the sudden loud volume may hurt your hearing and damage the unit. Turning ON/OFF the power Turning on Note: • Be careful when using this unit for a long time without running the engine.
Basic Operations Switching the display There are 2 basic operation modes: standard operation and simple operation. 1. Touch the center of the display. Each time you touch the display, it changes as follows: 1. In the main display screen, touch and hold the left of the display for 1 second or longer. The operation mode is switched. Title display USER SIMPLE MODE 4 98.1MHz 98.
Basic Operations English Wallpaper Spectrum analyzer display Touching and holding the center of the display for 1 second or longer switches to the wallpaper display. Touching and holding the right of the display for 1 second or longer during the spectrum analyzer (S/A) display switches the spectrum analyzer display. 1 9 S/A SCAN S/A 1, S/A 2, and S/A 3 are displayed for 10 seconds or longer each. S/A 1 S/A 0 2 WMA 01 / 01 : 48 1 MODE FLDR No.
Basic Operations Touch 4. To change the details of the ADF setting, press the [A] button. on the title display. Setting the ADF • ADF is the abbreviation of Anti Distortion Filter. The adopted “Liveliness Enhancement Filter” and “Sound Tone Compensation” functions allow well-modulated realistic playback without affecting the characteristics of the original sound tone. This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer.
Basic Operations English 4. Touch on the right of the display and adjust the item as desired. ∗ This item can be adjusted within the range -5 to +5. Adjusting bass/treble 5. Press the [SOUND] button to return to the original mode. The bass/treble mode can be adjusted only when the Dolby Pro Logic II mode is set to “OFF” (cf. page 17) and “EQ SELECT” is set to “BAS/TREB” (cf. page 39). • The factory default setting is “0”. Adjusting balance/fader 2. Touch A-MODE. 1. Press the [SOUND] button.
AC-Processor III Operations Dolby Pro Logic II is a matrix decoding technology in which updated digital matrix technology is applied and Dolby Pro Logic is further improved. Dolby Pro Logic II realizes excellent 5.1 channel reproduction of Dolby surround source as well as stereo sound sources such as CDs, thereby causing a surround channel to be full-ranged (20 Hz to 20 kHz) and become stereo. Therefore, you can enjoy any stereo sources with dynamic sound of 5.1 channel.
AC-Processor III Operations English 3. Touch on the ON/OFF display. The position effect is toggled ON/OFF. POSITION MODE FRONT RTN BASIC 3 OFF 1. Press the [SOUND] button. 2. Touch POSITION. BU B/U When the position effect is set to “OFF”, the position setting is not reflected on the music source. This ends the position setting. Press the [SOUND] button to return to the original mode. 4. Touch B/U to select “BASIC”. POSITION MODE FRONT ON RTN BASIC 3 BU B/U 3. Touch on the ON/OFF display.
AC-Processor III Operations 11. When you have finished adjusting each item, touch RTN. The display returns to the original screen, and “” is displayed at the BASIC or USER display. Operation so far completes position adjustment. To continue to store the adjustment values to the position user menu, perform the following. 12. Touch and hold RTN for 1 second or longer. The position menu list is displayed. 13. Touch and hold the user memory you want to store the adjustment values to for 2 seconds or longer.
AC-Processor III Operations English CAR LENGTH: Adjusts the deviation in sound pressure along the length of the car. 1. Press the [SOUND] button. 2. Touch VSE. on the ON/OFF display. 3. Touch The VSE effect is toggled ON/OFF. 4. Touch B/U to select “BASIC” or “USER”. 5. Touch on the right of the display to select the menu that is used as the menu for adjustment. 6. Press the [A] button. 7. Touch on the adjustment item display to select “DIFFUSE”, “CAR WIDTH” or “CAR LENGTH”. Selecting the P.EQ menu P.
AC-Processor III Operations Speaker Mounting No. Display name position 1 SEDAN-1 Front: Front door Rear: Rear parcel 2 SEDAN-2 Front: Front door Rear: Rear door 3 WAGON-1 Front: Front door Rear: Luggage (side) 4 WAGON-2 Front: Front door Rear: Rear door 5 MINI VAN-1 Front: Front door Rear: Luggage (side) 6 MINI VAN-2 Front: Front door Rear: Rear door 6. Press the [SOUND] button to return to the original mode. Adjusting/storing P.
AC-Processor III Operations English FREQUENCY (center frequency selection) Selects the frequency to be used as the center of the frequency band to be compensated from the range 20Hz to 20kHz. (1/3 octave steps, 31 points) GAIN (gain adjustment) Adjusts the gain (output level) within the range -12dB to +12dB. (1dB steps, 25 points) Q (Q curve selection) Sets one of 1, 3, 5, 7, or 20 as the sharpness of the Q curve.
Radio Operations For enhanced FM performance, the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction circuits and Multipath noise reduction circuits. Screen displays in the radio mode ■ Main display This is displayed by pressing the [ROTARY] knob and selecting the radio mode. USER MODE FM1 98.1MHz 4 MANU Manual indicator 3 2B BAND Preset No. display Reception band Title display Frequency display MODE Touching this displays sub-functions.
Radio Operations English Tuning Recalling a preset station There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. Recalling a preset station is a function for tuning pre-stored stations. Seek tuning 1. Touch and hold MODE for 1 second or longer. The preset memory list is displayed. Seek tuning is a function for automatically tuning stations with good reception. 1. Touch and hold BAND for 1 second or longer while MANU is displayed.
Radio Operations Preset scan Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked. Instant station recall (ISR) Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes. • The ISR function cannot be used when the 2ZONE function is in use. • The factory default setting is “FM87.9MHz”. 1.
CD / MP3 / WMA Operations English Screen displays in the CD mode ■ Main display This is displayed by pressing the [ROTARY] knob to select the CD mode. FOLDER 05 WMA 003 04 / 02 : 11 DRM indicator MODE FLDR No. TOP Folder display Title display Track/playing time display Touching the left of the display for 1 second or longer switches the simple operation display. SIMPLE MODE MODE T04 / 02 : 11 TOP Note: • This function is enabled only when a disc is playing.
CD / MP3 / WMA Operations MP3 is an audio compression method and is classified as audio layer 3 of the MPEG standard. This audio compression method has gained ground into PC users and Become a standard format. This MP3 features original audio data compression to about 10 percent of its initial size while keeping high sound quality intact. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs.
CD / MP3 / WMA Operations English Multi-session selection Loading a CD This function allows you to select either CD-DA or MP3/WMA files in the case of discs (e.g. CDEXTRA) containing a mixture of CD-DA (music CD) and MP3/WMA files. 1. Press the [Q] button. The control panel opens. 1. Touch MODE. 2. Touch M-SESS. Each touch of M-SESS toggles the M-SESS display between “CD” (play CD-DA) or “MP3/WMA” (play MP3/WMA). ∗ If M-SESS is not displayed, touch NEXT. 3. Touch RTN.
CD / MP3 / WMA Operations 1. Press the [ROTARY] knob to select the CD mode. ∗ Play automatically starts when the mode changes to the CD mode. Pausing play 1. Press the [ ] button. ■ To play the play list Play lists (M3U file) also can be played. Note, however, that of M3U files currently saved down to five layers (including the root) in the file hierarchy, only the top 5 files having new file timestamps can be played. Notes: • Up to 255 files can be played in a single play list.
CD / MP3 / WMA Operations English Scan play Folder repeat play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. This function allows you to repeatedly play the folder currently being played. This function is available only when a CD-R/CD-RW recorded with MP3 files or WMA files is loaded. 1. Touch MODE. 2. Touch -SCAN. The MODE display changes to “ -SCAN” and scan play starts.
The 2-ZONE function outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating 2 sources in the 1 center unit, thereby allowing 2 or more listeners to enjoy separate music sources. This unit can control its internal sources (radio, CD, MP3, etc.) to play them back, and further, can simultaneously play back sources from external equipment connected via CeNET (for instance, CD changers etc.).
English Different Pieces of Music Heard by Plural Listeners (2-ZONE function) ■ To switch the 2-ZONE function ON/ OFF 1. Press and hold the [SOUND] button on the unit for 1 second or longer. ■ To switch the 2-ZONE type Press and hold the [I] button on the unit for 1 second or longer while the 2-ZONE function is in use. Operations Common to Each Mode Screen display in the title entry mode ■ Main display This is displayed when the title entry mode is selected. (cf.
Operations Common to Each Mode When text type display is “A”: A E I M Q U X (space) When text type display is “a”: a e i m q u x When text type is “0-9”, “!?” or “Å”: All characters are displayed. RTN Touching this returns the display to the main display. NEXT Touching this displays the next text list. Entering titles You can give radio and TV stations a title up to 10 characters long, and to CDs. These titles can be displayed when broadcasts are received or when playing CDs.
Operations Common to Each Mode English Clearing titles Changing settings 1. Either receive the radio or TV station, or play a CD whose title you want to clear. Selecting setting items 2. Touch the center of the display to set to the user title display. When the display changes to the user title display, “USER” is displayed above the preset No. display. 1. Press the [A] button. The mode changes to the adjust mode. 3. Press and hold the [A] button for 1 second or longer.
Operations Common to Each Mode English ● Setting items Main Item DISPLAY APPERNCE SOUND PL II DELAY PL II CONT TUNER SETTING Sub-item CLOCK • Clock setting (cf. page 36) SCREEN SVR • Screen saver setting (cf. page 36) MSG INPUT • Message information input (cf. page 37) MESSAGE • Message display setting at power ON/OFF (cf. page 37) S/A SENS • Setting the Spectrum analyzer sensitivity (cf. page 38) SCROLL • Adjusting the scroll speed (cf. page 38) DIMMER IN • Auto-dimmer setting (cf.
Operations Common to Each Mode English Setting the clock (CLOCK) When the power is turned OFF with the clock displayed, the clock remains displayed even if this unit is turned off as long as the car engine is running (ACC is ON). The clock is displayed in 12-hour format. 1. Press the [A] button. 2. Touch on the setting item display to select “CLOCK” under “DISPLAY”.
Operations Common to Each Mode 4. Touch on the center of the display to determine the entry position. ∗ To clear the message, touch and hold the center of the display for 2 seconds or longer. If you perform the operation at step 8 with the message cleared, the message returns to its factory default setting. Spectrum analyzer pattern 3 5. Touch on the left of the display to select the type of text. Each touch of switches the type of text. For details, see page 32. Spectrum analyzer pattern 4 6.
Operations Common to Each Mode English Setting the sensitivity of the spectrum analyzer (S/A SENS) This function allows you to adjust the sensitivity (amount of deflection) of the spectrum analyzer. For details on displaying the spectrum analyzer, see “Switching the display” (cf. page 13) or “Setting the screen saver” (cf. page 36). • The factory default setting is “MID”. 1. Press the [A] button to set to the adjust mode. 2. Touch on the setting item display to select “S/A SENS” under “DISPLAY”.
Operations Common to Each Mode 4. Press the [A] button to return to the original mode. Adjusting the contrast of the display (CONTRAST) You can adjust the contrast of the display to match the mounting angle of the unit. • The factory default setting is “6”. 1. Press the [A] button to set to the adjust mode. 2. Touch on the setting item display to select “CONTRAST” under “APPERNCE”. ADJUST MODE CONTRAST 6 APPERNCE 3.
Operations Common to Each Mode English 2. Touch on the setting item display to select “AC-PROIII” under “SOUND” and “EQ SELECT” under “SOUND”. ADJUST MODE AC - PRO III PRO SOUND 3. Either touch on the right of the display, or turn the [ROTARY] knob to select the mode. Mode selection AC-PRO III STD • Standard mode (VSE menu) PRO • PRO mode (position menu) EQ SELECT P.EQ • Equalizer mode (P.EQ menu) BAS/TREB • Bass/treble mode 4. Press the [A] button to return to the original mode.
Operations Common to Each Mode This function allows you to adjust the filter frequency matched to the speakers you are using. • The filters (HPF/SUB-W LPF) that you can use differ according to the Dolby Pro Logic II mode setting. Dolby Pro Logic II mode setting MUSIC / MATRIX OFF Filter HPF SUB-W LPF*1 Not adjustable Adjustable Adjustable Adjustable *1 Adjustment is possible only when “SUB-WOOFER” is set to “ON”. • The factory default setting is “THROUGH”. 4.
Operations Common to Each Mode English 4. Touch on the adjustment item display to select the desired item. switches the Each touch of adjustment item as follows: Adjustment items FRONT L GAIN (front left speaker) CTR GAIN (center speaker) *1 SUB-W GAIN (sub-woofer) *2 FRONT R GAIN (front right speaker) SRD L GAIN (rear left speaker) SRD R GAIN (rear right speaker) *1 “CTR GAIN” is displayed only when “SPSETTING” is set to “CTR+SW” and “CENTER-SP” is set to “ON”.
Operations Common to Each Mode ADJUST MODE PANORAMA NO PLII CONT 3. Either touch on the right of the display, or turn the [ROTARY] knob and adjust the item as desired. ∗ Select “YES” or “NO” for “PANORAMA”. ∗ “DIMENSION” can be adjusted within the range 0 to 6. ∗ “CTR WIDTH” can be adjusted within the range 0 to 7. 4. Press the [A] button to return to the original mode. Displaying the Sirius ID No. (SID DISP) • This item can be set only when Sirius is connected. 1.
Operations Common to Each Mode English Using the security function (CODEMATIC) This function prevents persons who do not know the touch sequence from easily operating this unit. The Touch Code display appears when DCP is attached and the power is turned ON with “CODEMATIC” set to “ON”. If you touch the display in this screen in the preset order, “SUCCESSFUL” is displayed and the power is turned OFF.
English 8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer When an optional CD changer is connected through the CeNET cable, this unit can control CD changer operations. This unit can be connected to a total of 2 CeNET-wired CD changers. When an optional DVD changer is connected through the CeNET cable, this unit can control DVD changer operations. To view a DVD, an optional monitor is required.
CD Changer Operations English ■ Disc list display (CD changer mode) This is displayed by touching and holding MODE for 1 second or longer in the main display. Disc name 001 NO TITLE 002 003 JAZZ NO TITLE PREV -RTN TITLE LIST TITLE** TITLE** 004 005 TITLE** 006 NEXT Disc No. : Selection in progress Touching a disc name returns the screen to the main display, and play starts from the first track in the disc you touched. ➔ PREV-RTN: Touching this displays the previous title list.
CD Changer Operations ■ To cancel disc scan play The top function starts play from the first track on the disc currently being played. 1. Touch D-SCAN. The D-SCAN display changes to “MODE”, and the track that was playing when you touched D-SCAN is played. 1. Touch and hold MODE for 1 second or longer. The disc list is displayed. If you touch NEXT, the next part of the disc list is displayed. 2. Touch the disc name.
English CD Changer Operations TV Operations Random play TV tuner function Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is canceled. When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV, you need a TV tuner and a monitor. 1. Touch MODE. 2. Touch T-RANDOM. The MODE display changes to “T-RDM” and random play starts. ■ To cancel random play 1.
TV Operations a d (only in the simple operation display) Touching these buttons enables seek tuning or step tuning (in the manual tuning mode). Touch and holding these buttons enables quick tuning (in manual tuning mode). ■ Preset memory list display 002 5ch 80ch 004 005 Seek tuning Seek tuning is a function for automatically tuning stations with good reception. 1. Touch and hold BAND for 1 second or longer while MANU is displayed. Automatic tuning is possible when MANU disappears. 2.
TV Operations English Recalling a preset station This function allows the user to select a preset a preset station. 1. Touch and hold MODE for 1 second or longer. The preset memory list is displayed. 2. Touch the station you want to listen to. * The station can also be tuned by touching at a preset No. ■ To cancel tuning 1. Touch RTN. Preset memory A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. 2.
TV Operations The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 1. Press the [ ] button. VTR is displayed, and the mode is switched to the VTR mode. ∗ The TV screen enters the video input mode, and videos can be viewed. ■ To return to the TV mode 1. Press the [ ] button again.
5.1ch Surround Decoder Operations English 3. Touch on the right of the display to select the Dolby Pro Logic II mode. 4. Touch on the DSF menu No. to select the desired DSF menu. DSF MODE RTN Dolby PL II OFF CHURCH 1 ON The mode display is switched as follows: MUSIC (music mode) ➜ MATRIX (matrix mode) ➜ MOVIE (movie mode) ➜ VIRTUAL (virtual mode) ➜ OFF (PL II off) ➜ MUSIC (music mode)... * For details on the volume adjustment of the center speaker/sub-woofer, see page 40.
5.1ch Surround Decoder Operations 4. Touch on the P.EQ menu No. to select the P.EQ menu. P.EQ MODE FRONT RTN SP - SEL ■ P. EQ adjustment The settings that can be adjusted in the P.EQ menu are as follows. The center frequency, gain and Q curve can be stored to channel/band combinations. For example, center frequency “250Hz”, gain “ -8dB” and Q curve “3” can be stored to band 1 on the front. For details on the P.EQ function, see “P. EQ adjustment” (cf. page 21). ON P.
5.1ch Surround Decoder Operations English ● Setting items Main Item SOUND DELAY DOLBY D PL II CONT Sub-item CENTER-SP / SRD-SP / SUB-WOOFER • Setting the speaker ON/OFF (cf. page 54) FRONT HPF / CENTER HPF / SRD HPF / SUB-W LPF • Adjusting the speaker filter frequency (cf. Page 54) SP GAIN • Adjusting the speaker output level (cf. page 41) CENTER-SP / SRD-SP • Adjusting the speaker delay time (cf. page 55) D-RANGE • Adjusting the dynamic range (cf.
5.1ch Surround Decoder Operations ADJUST MODE FRONT HPF THROUGH SOUND 3. Either touch on the right of the display, or turn the [ROTARY] knob to set the frequency. ∗ Select one of THROUGH*1, 50Hz, 80Hz, and 120Hz. *1 THROUGH is displayed only when “FRONT HPF” or “SRD HPF” is selected. 4. Press the [A] button to return to the original mode.
Problem Cause Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead.
CD/MP3/WMA Cause Measure Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place. Let dry for about 1 hour with the power on. Wrong filename File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. File name or extension is not correct. Use alphanumeric/ASCII characters for MP3/WMA file name. Use “.M3U” for the file extension of a play list. Play list play is not performed.
If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Measure ERROR 2 A DISC is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A DISC cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A DISC is loaded upside-down inside the CD deck and does not play. Eject the disc then reload it properly.
FM Tuner Audio Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 9 dBf 50dB Quieting Sensitivity: 15 dBf Alternate Channel Selectivity: 70 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Maximum Power Output: 212 W (53 W × 4 ch) Continuous Average Power Output: 18 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD Bass Control Action (50 Hz): ±12 dB Treble Control Action (12.5 kHz): ±12 dB Line Output Level (CD 1 kHz): 4 V/F 2ch + 4V/R 2ch 4 V/SUB WOOFER 2ch 0.